Jump to content
SAU Community

Recommended Posts

oof cutting it fine

Its never been the DiRTgarage way to give up or give in....and its not about to start!

got to run diff centre again to Sydney today to be modified (should have left parts there last night when i went down)...then back to Newcastle this arvo to install it tonight.

then tuning tomm and racing sunday

  • Replies 114
  • Created
  • Last Reply

Top Posters In This Topic

Its never been the DiRTgarage way to give up or give in....and its not about to start!

got to run diff centre again to Sydney today to be modified (should have left parts there last night when i went down)...then back to Newcastle this arvo to install it tonight.

then tuning tomm and racing sunday

Come on, Paul. You know you wanna give up and spend the day just watching and cheering on all us little people in the reserve grades! :D

right...the silver cars diff is in and running...the ecu is in and not running.

the black car is ready but may need to lend the silver one some bits...

up bright and early big day ahead...

Bracket racing..hehe..a few experienced boys at my last bracket meet were put on the trailer early by a novice in a pretty little silver riceburner.

Edited by DiRTgarage

Marks runs were:

10.6

8.1 w/ 1.32sec 60ft

10.7 w/ 1.23 60ft

8.07 @ 171mph w/ 1.25sec 60ft

Had the track have been 10c warmer and the surface prep been better the car would have run a comfortable 7.9 possibly even a high 7.8sec pass.

Videos were taken, im sure they will be posted sometime tomorrow.

post-1296-1211102961_thumb.jpg post-1296-1211103017_thumb.jpg post-1296-1211103068_thumb.jpg

Edited by benm
Marks runs were:

10.6

8.1 w/ 1.32sec 60ft

10.7 w/ 1.23 60ft

8.07 @ 171mph w/ 1.25sec 60ft

Had the track have been 10c warmer and the surface prep been better the car would have run a comfortable 7.9 possibly even a high 7.8sec pass.

Videos were taken, im sure they will be posted sometime tomorrow.

post-1296-1211102961_thumb.jpg post-1296-1211103017_thumb.jpg post-1296-1211103068_thumb.jpg

good to see mark finally taking some weight out of the car!

a 1.23 sixty with Mark's usual MPH is a 7.8x pass. Car sounded nuts all weekend!

and a 3.3 to the 330 was big too. Unfortunately the track past the 330 was lacking as it was from this point onwards the car was out of shape. Spinning the rears in top gear to 170MPH and no lift off from throttle when we checked the MoTeC data...i don't know if that was brave or silly...but it was worth it.

Big thanks from all the GMS crew to Benm for supplying and operating the recovery vehicle for us all day.

I was going to ask if that was Bens shaggon waggon

its currently doing deliveries in the sydney metro area proudly displaying its Godzilla Motorsport livery.

News on our car...

Got diff in and running friday....put Autronic in and had a few problems getting it running. Finally got it sorted late Saturday afternoon and tuned. The ATTESSA ecu was not recieving the correct signals from the Autronic to run the 4WD. We tried bridging over a TPS signal and lost the bloody tune!! The Autronic went bonkers and took an hour to recover it. Mark retuned the car in about an hour and by midnight had it running and making good power. We again got out the wiring diagrams and found that the earlier bridge we ran was on the wrong pin...bugger. Got the TPS signal to the ATTESSA and the 4WD came alive. However the output was making the TPS ecu input unstable and we decided at 2.30am to pack it up and concentrate our efforts on Marks car. Deciding that running the car while not 100% was not worth risking the chance of damaging it...so yes with only a few hours sleep that night we rocked up and set a new Aussie GTR record.

Spinning the rears in top gear to 170MPH and no lift off from throttle when we checked the MoTeC data...i don't know if that was brave or silly...but it was worth it.

According to my mate in the white swift who was racing Mark it was forking awesome! He was nearly as excited about the GTR going past him like he was standing still as he was his 12.88.

I'll post the footage tonite. It's pretty funny to see the camera focused on the street-tyred Swift and then this black thing just screams past it out of nowhere taking up all the track and then some as it disappears into the distance.

According to my mate in the white swift who was racing Mark it was forking awesome! He was nearly as excited about the GTR going past him like he was standing still as he was his 12.88.

can you please ring him and thank him, as if it wasnt for him agreeing to the lane swap the 8.0 would not have happened. I was doing 2rismo stlye organising behind the staging lanes as the official behind the tower would not allow us into the lane we wanted.

can you please ring him and thank him, as if it wasnt for him agreeing to the lane swap the 8.0 would not have happened. I was doing 2rismo stlye organising behind the staging lanes as the official behind the tower would not allow us into the lane we wanted.

He mentioned that he'd agreed to swap lanes and I told him that having run an 8.0, Mark would be very appreciative. He's a good guy, young Paulie. He'll be king of the kids in GTi land.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...