Jump to content
SAU Community

Recommended Posts

woo just bought my skyline and now im over the moon :D , i just couldnt say no to 220rwkw :D . and a list of decent mods. its a series 2 r33 also i need some help getting road worthy as in atmo bov, ebc and turbo timer will it pass with these

Edited by Greekos
Link to comment
https://www.sau.com.au/forums/topic/213465-just-bought-my-first-skyline/
Share on other sites

woo just bought my skyline and now im over the moon :D , i just couldnt say no to 220rwkw :D . and a list of decent mods. its a series 2 r33 also i need some help getting road worthy as in atmo bov, ebc and turbo timer will it pass with these

Welcome.

From the information previously stated here:

atmo bov should not pass,

ebc should not pass (remove the inside controller and likely to get through)

Timers should pass, might depand on how they are set up.

But I keep mine fairly stock, so haven't needed to do much with complying mods.

where abouts do you live, if its in belconnon ill come and have a look for you! if its the nhead gasket mightnt be to bad but there normally is a reason that the gasket went, which is what you have to worry about , make shaw its not running to much boost. good luck , stuart

the previous was sort of old and looked genuine as he bought an 34, i didn't check the radiator as the car went well, and had the correct support mods but the workshop that installed the engine were only able to give a safe tune to the car. the problem is the radiator has A LOT of black oil and i have lost some oil from the engine when i checked this afternoon.

Edited by Greekos
comment removed, turns out that cooling system wasn't cleaned properly

Glad to see you got it all sorted out - and both of our minds are at rest.

Enjoy your new car man! and like I said when I sold it to you - get some new tyres!!!!! :blink: i don't want to see a picture of the car in a newspaper twisted around a tree... be safe, take it to a skidpan and learn the feel and responsiveness and you'll have some fun :)

cheers matey..

Enjoy your new car man! and like I said when I sold it to you - get some new tyres!!!!! ;) i don't want to see a picture of the car in a newspaper twisted around a tree... be safe, take it to a skidpan and learn the feel and responsiveness and you'll have some fun ;)

cheers matey..

no problems, as for tyres i spent about 1k haha that should hold me to the ground :) . as for the skidpan next time ACT SAU has one i'll be there :blink:

Thanks Theo

Enjoy your new car man! and like I said when I sold it to you - get some new tyres!!!!! :P i don't want to see a picture of the car in a newspaper twisted around a tree... be safe, take it to a skidpan and learn the feel and responsiveness and you'll have some fun :)

cheers matey..

no problems, as for tyres i spent about 1k haha that should hold me to the ground :blush: . as for the skidpan next time ACT SAU has one i'll be there :down:

Thanks Theo

hey again!

similar to my last post, i was at Trojan today and saw the old beast sitting there... i had a look at the tyres and my goodness - well done on some good tyres... they looked great and would hold a fair amount of traction down..

you'll have to take me for a spin in it some time - would love to see how much power she puts out in a drive now that she has some good traction... grats :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...