Jump to content
SAU Community

Recommended Posts

My 19's were originally a pearl silver colour, but would always look white in photos.

When i painted the car, i powder-coated the rims to "precious steel pearl". Didn't need sandblasting as rims were still in unmarked condition. Payed $120 for all four 19" rims

Before:

post-1811-1207568013_thumb.jpg post-1811-1207568051_thumb.jpg

After:

post-1811-1207568244_thumb.jpg post-1811-1207568273_thumb.jpg

blasting is used to both clean off old coatings that may not survive the curing process as well as to etch the surface to improve the adhesion of the coat.

they look great Al, im suprised they didnt strip them first though.

blasting is used to both clean off old coatings that may not survive the curing process as well as to etch the surface to improve the adhesion of the coat.

they look great Al, im suprised they didnt strip them first though.

The surface was hand sanded before coating.

Coating has now lasted about 4.5yrs. In that time they have seen multiple track fun days, motokahnas, drags, spirited cruises, etc.; Yes on a couple of occasions i cnbf swapping rims so i done a couple of track fun days with the 19's :D. The coating has not cracked or bubbled, so they have withstood all the punishment.

I have seen other rims powder-coated and some have flaked off, etc. This would be due to poor workmanship and preperation.

I only had to re-coat one rim as i got a little too close to my garage center brick pillar :blink:

The surface was hand sanded before coating.

Coating has now lasted about 4.5yrs. In that time they have seen multiple track fun days, motokahnas, drags, spirited cruises, etc.; Yes on a couple of occasions i cnbf swapping rims so i done a couple of track fun days with the 19's :D. The coating has not cracked or bubbled, so they have withstood all the punishment.

I have seen other rims powder-coated and some have flaked off, etc. This would be due to poor workmanship and preperation.

I only had to re-coat one rim as i got a little too close to my garage center brick pillar :blink:

they do look sweet

hand sanding is fine if the coating will stand up to the temps for the cure. cant wait to get my new oven setup so i can start doing some rims

where they clear coated aswell?

they do look sweet

hand sanding is fine if the coating will stand up to the temps for the cure. cant wait to get my new oven setup so i can start doing some rims

where they clear coated aswell?

My 19's were not clear coated as i wanted the satin finish.

My 17" track rims are clear coated as i wanted to see the difference between satin and gloss.

The gloss makes the "pearl" in the powder coat shine more, but the satin finish is smoother as it obviously has less layers.

post-1811-1207654569_thumb.jpg

My 19's were not clear coated as i wanted the satin finish.

My 17" track rims are clear coated as i wanted to see the difference between satin and gloss.

The gloss makes the "pearl" in the powder coat shine more, but the satin finish is smoother as it obviously has less layers.

dont knwo what you mean by smoother with less layers - you can get satin clears too

got any close ups of the colour?

  • 2 months later...

Can anyone recommend a specialist in Sydney or better still Western Sydney that can do good sanding + powder coating?

And would 'black' powder coat look good on OEM R34 wheels on a R34 GTR that's already pearl black?

And lastly would you paint the wheels satin or gloss? I get the feeling that satin would highlight the car more (- whereas gloss would pull attention away from the car).

Any opinions?

Cheers

Can anyone recommend a specialist in Sydney or better still Western Sydney that can do good sanding + powder coating?

And would 'black' powder coat look good on OEM R34 wheels on a R34 GTR that's already pearl black?

And lastly would you paint the wheels satin or gloss? I get the feeling that satin would highlight the car more (- whereas gloss would pull attention away from the car).

Any opinions?

Cheers

Check out Twoogle - r32 GTR with r34 GTR rims in black for how the rims will look. - in latest HPI mag

im hoping to have my new setup done in about a month then i'll be able to help you out with coating the rims :whistling: im near Richmond so not too far from you aswell.

dont knwo what you mean by smoother with less layers - you can get satin clears too

got any close ups of the colour?

Sorry for the late reply Chris, never received notification of your reply in this thread.

In my experience the clear coat, added on top of the colour powder coat, has more of an orange peel finish.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...