Jump to content
SAU Community

Best & Reliable Mechanics For Engine Rebuild In Nsw

10MinuteCar

By 10MinuteCar,
in New South Wales

 Share

Recommended Posts

10MinuteCar Collaborator

10MinuteCar

Posted
Posted

hi i need to know the best place in Sydney to take my car in for engine rebuild as i may need to change piston rings. i need mechanics who won't overcharge me and do the job like they have done before efficiently and perfectly.

Pezhead Grand Master

Pezhead

Posted
Posted

There are plenty of good shops around, but why do you think you only need to change the rings? If your motor is tired then you will at least need to do the pistons and rings together. They will need to hone the bores if you are lucky (not too worn or scored) or bore them out if they need to be cleaned more than a hone.

While you are doing all this you might as well change the oil pump, have the rods cleaned and inspected (maybe shot peened), etc. Since the head has to come off to do this, you might as well do it too. Do a valve grind and possibly replace the valve guides or at least the seals.

The objective of a rebuild is generally to return/enhance the core strength and tolerances of a motor and that takes a lot more than just replacing a few items.

I doubt you'd find a reputable shop that'd only do the rings.

(my 2 cents)

10MinuteCar Collaborator

10MinuteCar

Posted
  • Author
Posted

thanks alot with the help! yeah im thinking doing exactly wat u said "pezhead" but yer i need a workshop who knows wat they're doing like wat other things to look for potential damage. How much do you think it'll cost to do all what you said?

10MinuteCar Collaborator

10MinuteCar

Posted
  • Author
Posted

BTW nobody recommends shops such as belgarage, CRD and etc? are the just good in performance mods and not rebuilding an engine? who are the reputable engine builders? i'd appreciate it very much.

TommO Grand Master

TommO

Posted
Posted
BTW nobody recommends shops such as belgarage, CRD and etc? are the just good in performance mods and not rebuilding an engine? who are the reputable engine builders? i'd appreciate it very much.

They're good but you pay a lot for their experience.

TommO Grand Master

TommO

Posted
Posted (edited)

A mate just got his engine (SR20) built from http://www.stmarysengines.com.au/, they did the head work / machining / fitting etc, and my mate providing the parts (cams / pistons / rods / timing gear)... They seem to be very good so far, and we'd heard nothing but good things.

Other than that, almost EVERY workshop send your block/heads to specalists for machining etc..

Edited by TommO
JDSracing Community Regular

JDSracing

Posted
Posted
yep but they also send the heads away for machining and such. i guess there are just no workshops who acutally do the head work themselves.

Leon's Engineering in Artarmon,

Does full engine building and head work themselves (well, when I last used them a bit over 4 years ago now).

10MinuteCar Collaborator

10MinuteCar

Posted
  • Author
Posted

yep i called up proengines, they seem to be very promising and really knows their stuff. but the price is still around the 6k mark just to freshen up the engine back to normal leaving it as stock internals. im guessing its the parts which bring the price up like this.

FATAZZ Grand Master

FATAZZ

Posted
Posted
Has anyone heard of Insight Motorsport (i think that's what it's called). A workshop recommended them to me for a tune.

Any thoughts?

They put a GT35 or 40R turbo on this dude's(friend of friend) 2.7L hillux.

tuned with all supporting mods,i went and spoke to the bloke at Insight.He seems nice.

Their just off Holbeche. not much but hope it helps.

From memory they looked to have a few evo rally cars they were working on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R32 Gtst - Track Car

      By Duncan · Posted

      Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • Dose Pipe Sutututu
      R32 Gtst - Track Car

      By Dose Pipe Sutututu · Posted

      https://www.facebook.com/share/p/18rmVb1SKB/ 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • No Crust Racing
      R32 Gtst - Track Car

      By No Crust Racing · Posted

      Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • MBS206
      R32 Gtst - Track Car

      By MBS206 · Posted

      I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...