Jump to content
SAU Community

Recommended Posts

hi, can anyone tell me the [correct] offsets for 19.8.5 front,and 19.9.5 rear, for a v35 2003 prem coupe, I would like to keep tyres inside guards, any help on this would be great. Thanks G.T.

The most common offsets for those sizes are +22 front and rear. However if you are lowered and how far will also play a part in how agressive you can go with the offset.

I've also seen front offsets go into the high teens, but by far +22 is the most common.

I'm currently running +24 F and +28 rear on the sizes you mentioned and to they look fine, and i have no rubbing issues at all. The car i slightly lowered with Nismo springs and shocks.

Good time for a pic :D

v35ixgg5.th.jpg

Link to comment
https://www.sau.com.au/forums/topic/213938-19-inch-wheels/#findComment-3777800
Share on other sites

With the right tyre profile you can go lower.

People run 9.5 / 10.5 with +22 offsets for the wheels in the stock guards. If you're running an inch narrower wheels, you can afford to drop 5mm off those offsets and still be safe.

Link to comment
https://www.sau.com.au/forums/topic/213938-19-inch-wheels/#findComment-3778686
Share on other sites

With the right tyre profile you can go lower.

People run 9.5 / 10.5 with +22 offsets for the wheels in the stock guards. If you're running an inch narrower wheels, you can afford to drop 5mm off those offsets and still be safe.

Thanks, the wheels Im getting are 19.8.5 F. and 19.9.5 R. offsets for front are 22,30,38,45. The rear offsets are 30,38,45, only. Do you know what the best combo would be. Thanks very much for help. G.T.
Link to comment
https://www.sau.com.au/forums/topic/213938-19-inch-wheels/#findComment-3778813
Share on other sites

The most common offsets for those sizes are +22 front and rear. However if you are lowered and how far will also play a part in how agressive you can go with the offset.

I've also seen front offsets go into the high teens, but by far +22 is the most common.

I'm currently running +24 F and +28 rear on the sizes you mentioned and to they look fine, and i have no rubbing issues at all. The car i slightly lowered with Nismo springs and shocks.

Good time for a pic :Dv35ixgg5.th.jpg

Thanks nismo, what size tyres are you running, and what is now the ride height from standed now. as per pics thanks G.T. p.s. going to use standed 350z springs for drop,would any year model be OK, Looking for small drop, is it about 15mm not shaw.
Link to comment
https://www.sau.com.au/forums/topic/213938-19-inch-wheels/#findComment-3780495
Share on other sites

Thanks nismo, what size tyres are you running, and what is now the ride height from standed now. as per pics thanks G.T. p.s. going to use standed 350z springs for drop,would any year model be OK, Looking for small drop, is it about 15mm not shaw.

Hey mate,

Tyres are

F 245/40/19

R 275/35/19

The drop I have is very subtle, probably about the same as what you would get from 350z springs. I lowered my last one on 350z tein H-techs and was very happy with the drop, a bit more than the pic I have but it did scrape on the odd driveway.

However the NISMO package is a massive step forward compared to stock. I've driven a stock coupe around a track, and my current one which as NISMO springs/shocks and sways and it's like night and day.

Link to comment
https://www.sau.com.au/forums/topic/213938-19-inch-wheels/#findComment-3780754
Share on other sites

Hey mate,

Tyres are

F 245/40/19

R 275/35/19

The drop I have is very subtle, probably about the same as what you would get from 350z springs. I lowered my last one on 350z tein H-techs and was very happy with the drop, a bit more than the pic I have but it did scrape on the odd driveway.

However the NISMO package is a massive step forward compared to stock. I've driven a stock coupe around a track, and my current one which as NISMO springs/shocks and sways and it's like night and day.

Hey nismo, you say you are running 245/40/19 F, is the rolling Dia larger than STD, I thought 245/35/19 would have been the correct size for the front, was there a reason for the larger Dia Tyre, just curious, Thanks mate G.T.
Link to comment
https://www.sau.com.au/forums/topic/213938-19-inch-wheels/#findComment-3783803
Share on other sites

Hey nismo, you say you are running 245/40/19 F, is the rolling Dia larger than STD, I thought 245/35/19 would have been the correct size for the front, was there a reason for the larger Dia Tyre, just curious, Thanks mate G.T.

Hey mate,

Yep it is slightly larger than standard, but I did a bit of reasearch and the sizes I have (front and rear) work fine together and don't effect teh VCD in any way.

I didn't specifically look for these but when my rims came in from Japan, the tyres were removed. And the guy who brought them in only had these in his workshop and offered them to me at no extra cost. The tyre's are Michelin Pilot Sport PS2 which are around $900 each so i would have been crazy to not take them. :-)

Link to comment
https://www.sau.com.au/forums/topic/213938-19-inch-wheels/#findComment-3787087
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...