Jump to content
SAU Community

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

yes s3 gtr xenon headlights fit BUT IT is no easy job and they dont just bolt on.

i bought a set and put them on my car, it took me along time to get them to fit correctly, as you need to trim alot of the headlight and ballast mount. and because you trim the mounts also there is nothing holding the headlight in place unless you make mounts and secure them.

Also the plugs are different so you can cut up the gtr ones or chop them off and put the gts-t on them.

stock s1 gts-t grill also doesn't fit correctly.

its far from an easy job and when you have to trim/cut up headlights which are worth more than $2000 each from nissan it does hurt

dont ask me whose car this is. i dont know. he's on here tho. tuffest front on a r33 i've seen tho

post-30915-1207725884_thumb.jpgpost-30915-1207725816_thumb.jpgpost-30915-1207725770_thumb.jpg

Im in love :( Thats the same frount bar and side mirrors as myn lol now iv just gotta find them and see what i can do and if i can keep it legal

Would this mean gtr lights on a gts-t are iilegal? i was thinking if i did the angel lights using my sr1 base and frount lense i could maybe engineer them.

Not sure if that sounds stupid but i really like thoses lights

Would this mean gtr lights on a gts-t are iilegal? i was thinking if i did the angel lights using my sr1 base and frount lense i could maybe engineer them.

Not sure if that sounds stupid but i really like thoses lights

those headlights are illegal because the globes are no case in anything. if you do a retro fit to your s1 headlights then it will be fine.

there is a place in japan that can covert s3 gtr headlights to angle eyes i see if i can find the link (the price is around $300)

"there is a place in japan that can covert s3 gtr headlights to angle eyes i see if i can find the link (the price is around $300)"

$300 ?? does that mean you send them your lights and they modify them? I think they look wicked.

"dont ask me whose car this is. i dont know. he's on here tho.

tuffest front on a r33 i've seen tho

Reduced 91%"

If i did this to my car but made a fiberglass moulding for it, would it pass or would i need a clear lense in front too??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...