Jump to content
SAU Community

Mobile Mechanic

GTAAAH

By GTAAAH,
in Victoria

 Share

Recommended Posts

GTAAAH Mentor

GTAAAH

Posted
Posted (edited)

Yo, got a gtr sitting here in pieces, been like this 3 months, im over it (tensioner bearing died just b4 i had it booked in to get the noise checked).. Just needs the timing checked (i'm scared it skipped a tooth so will need to check cam timing and whether engines tdc) and belt put on, then front cover and belts, i can do radiator and all that myself easily enough.. just to lazy to put it back together, anyone know a joint who will come out and do it for me? or anyone wanna come gborough and do it for like 200 bucks.. it's probably 1-2 hours work max.. have a full garage with all tools etc, but cant be fkd towing it to a joint and i'm paying 2800 insurance a year for a car i cant drive z

Edited by GTAAAH
Link to comment
https://www.sau.com.au/forums/topic/213976-mobile-mechanic/
Share on other sites
GTAAAH Mentor

GTAAAH

Posted
  • Author
Posted (edited)

the engine was still running okay (with the noise) it wasn't till one morning it didn't start and probably only turned over a few times.. i'm hoping the belt just slipped back a few teeth, screwed up the timing and that's why it didnt start.. otherwise will sell it as is.. so over skylines now

Edited by GTAAAH
Link to comment
https://www.sau.com.au/forums/topic/213976-mobile-mechanic/#findComment-3778540
Share on other sites
GTAAAH Mentor

GTAAAH

Posted
  • Author
Posted (edited)

thx.. for all i know it's perfectly fine.. was running with no bearings in the tensioner for a while, just slipping over the tensioner and not rolling it.. belt didn't get frayed either strangely enough

have got a few pm's from ppl i'm responding to

Edited by GTAAAH
Link to comment
https://www.sau.com.au/forums/topic/213976-mobile-mechanic/#findComment-3778646
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...