Jump to content
SAU Community

Recommended Posts

Hey Everyone,

I own a 96 gtst s2 r33 and the abs light stays on. i have done a diagnostic check on the ecu and there are no errors, this is where i am stuck because the abs is working but the light stays on. I have checked and cleaned the sensors the unit itself is not leaking, brake fluid is fine the only thing i havnt done is followed the wires to the relay etc. does anyone know where this relay is located, or pics of it or does anyone have any sugestions on what could be wrong?

By the way i had an alarm put in, but i saw the bloke and he told me he didnt connect wires to anything to do with the abs!

Plz Help!

Link to comment
https://www.sau.com.au/forums/topic/214606-abs-light-stays-on/
Share on other sites

OMG i got the exact same problem.

Just happened out of know where an hour ago :laugh:

Was at friends house from morning, drove the car around to go get lunch etc (No problems at all).. So when the time came to come home, turned it on and noticed the light was on.. strange!! so kept driving.. still on!! Turned the car off at the lights, turned it back on and still on.

Drove home, car felt normal. Brakes work as per usual.. Hard-braking the car pulls up nicely.. NO dramas!!

The brake fluid resivor is full.

Thats all i have checked so far.

Got told by a friend that the fuse could be gone. So will check that tomorrow.

Nickandsarah - check your fuse (located under the steering wheel - green one.. so i was told)

Edited by siddr20

hey there yeah i had a look today at the fuses under the steering wheel but couldnt find an abs one,

i know there r 2 in the engine bay fuse box but i think they r ok! well they dont look damaged or blown

but i dont have a series 2 english fuse diagram for the inside fuses i will try and find one!!! how did you go

did you fix yours?

you will find that the ABS fuse is in the engine bay fuse box.....mine blew *dont ask why* and i struggled to find info and stuff till a bit of playing around helped me there.......the ABS fuse is a 30A fuse in the fusebox in the engine bay....looks brownish in my s1 r33 so could be the same.....they are sorta hard to get hold of....

good luck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...