Jump to content
SAU Community

Recommended Posts

Hi everyone,

I was wondering what would be the effects of removing the standard cat and replacing it with a 3" stainless steel on a one would be on a near GT-T?

I've heard that this may result to a huge loss in lower end power.

Can anyone advise? Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/214771-r34-gt-t-cat-replacement-pipe/
Share on other sites

Whoever told you you'll loose power/top end is a moron :D

If the car is stock, probably no real increase as the rest of the exhaust needs to be upgraded.

Apart from the fact its illegal, and it will cause your car to get a lot of build up on the rear bar (in less than a week if daily driven)... you wont loose power or anything. Its the non-legal hi-flow cat basically

Whoever told you you'll loose power/top end is a moron :D

If the car is stock, probably no real increase as the rest of the exhaust needs to be upgraded.

Apart from the fact its illegal, and it will cause your car to get a lot of build up on the rear bar (in less than a week if daily driven)... you wont loose power or anything. Its the non-legal hi-flow cat basically

Well the exhaust system is turbo back stainless steel. I've noticed it's a lot smoother to drive now (is that odd?), but I dunno if its me, I feel as if theres a loss of power lower end (do excuse my error). The build up will be an issue I guess... but I've got a black car so maybe not as noticable... (more whipping every day?)

why on earth would u replace just the cat? thats just stupid? your doing a half ass job, why not do the whole exhaust.

if it is a turbo back exhaust the only reason that i can think of as to why it might feel not as powerful is the power is alot smoother in delivery rather then a light switch on/off situation.

for example\

by 3,00rpm you might be makn only 80kw with the standard cat and only 60kw with the bigger cat.

but at 4,000rpm your makn 90kw but with the bigger cat your at 120kw.

but basicly who ever told u your losing power by gettn a bigger exhaust is a MORON

im very very very sure you got more power, it justs just proberly bringing the power on smoother.......

best way to find out is dyno it

Edited by R34NRG

You should just get one of the Catco 3" cat's with the 5" body,they flow not too much less than a de-cat pipe anyway really and they r legal and your exhaust wont stink... you can get them off this forum i think the guys user name is Batmbl or something like that, I have one on my car (with a 3" turbo back exhaust) and its making more power everywhere

You should just get one of the Catco 3" cat's with the 5" body,they flow not too much less than a de-cat pipe anyway really and they r legal and your exhaust wont stink... you can get them off this forum i think the guys user name is Batmbl or something like that, I have one on my car (with a 3" turbo back exhaust) and its making more power everywhere

Thanks guys, been a great help. I was thinking that I didn't feel a large loss for lower end power. Definately have a smoother ride. Need to get some cash up I think. Anyway, once again thanks for all the help.

why on earth would u replace just the cat? thats just stupid? your doing a half ass job, why not do the whole exhaust.

if it is a turbo back exhaust the only reason that i can think of as to why it might feel not as powerful is the power is alot smoother in delivery rather then a light switch on/off situation.

for example\

by 3,00rpm you might be makn only 80kw with the standard cat and only 60kw with the bigger cat.

but at 4,000rpm your makn 90kw but with the bigger cat your at 120kw.

but basicly who ever told u your losing power by gettn a bigger exhaust is a MORON

im very very very sure you got more power, it justs just proberly bringing the power on smoother.......

best way to find out is dyno it

Read the post above and you will see he already has an aftermarket exhaust...

Read the post above and you will see he already has an aftermarket exhaust...

Indeed your right. I was driving the car today and it really does feel like its lost a lot of lower end power. Theres definately a smoother ride, moving through the gears, the car doesn't thrash as violently as I remember it being and when boost kicks in, its definately not what it used to be (maybe I'm getting used to it?). Would this actually be the case or am I being too obsessive? I had a look at the cat I removed and from what I can tell, it may have actually been a hi flow cat (looks a lot larger anyway, bugger!). What would everyones thoughts be?

Just be warned that in some states having a de-cat pipe can be a huge fine. Victoria is somewhere around 10K if the EPA catches you...

Batmbl sells quality metal cats, although I'd recommend the extra $$$ to get one with flanges from him, as I found getting someone to fit flanges carefully was expensive ;)

Just be warned that in some states having a de-cat pipe can be a huge fine. Victoria is somewhere around 10K if the EPA catches you...

Batmbl sells quality metal cats, although I'd recommend the extra $$ to get one with flanges from him, as I found getting someone to fit flanges carefully was expensive ;)

Damn! Thanks for the heads up. Thats a scary thought to have looming above me... I'll be sure to do some checking out soon~

10K if the EPA catches you

here in qld only the COMPANY that installed it gets that fine. e.g an exhaust shop.

if u are caught u are defected and off to court u go.

keep it in the garage for the track mate. u can smell a decat'd exhaust a mile away.

Edited by r33cruiser
here in qld only the COMPANY that installed it gets that fine. e.g an exhaust shop.

if u are caught u are defected and off to court u go.

keep it in the garage for the track mate. u can smell a decat'd exhaust a mile away.

I agree with you there. Looks like more than likely I'll get myself a high flow cat and replace the pipe. A shame... I'll miss that roar. Thanks for the genuine advice once again, its good to hear the pros and cons from everyone

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
    • That's my life. Past-Duncan has a lot to answer for
×
×
  • Create New...