Jump to content
SAU Community

Anyone Know Of People That Highflow Injectors?

blitza

By blitza,
in Queensland

 Share

Recommended Posts

blitza Collaborator

blitza

Posted
  • Author
Posted
Not sure on costs but Mobile Injector Service can do highflowing. I reccomend spending the money and buying bigger injectors tho.

What are some reasons to upgrade to bigger injectors apart from just having a newer item in there?

R334door Experienced

R334door

Posted
Posted

when your stock injectors cant flow enough fuel to your engine from either turbo increase or just boost pressure you need more fuel to equal the amount of air going in on a ratio.I woulnd tget hi flow ones my old man has had bad expericence with them.I just buy new ones and so be it plus there nto that expensive now, you can get 555cc nismo ones for aound 750 to 850 a set

blitza Collaborator

blitza

Posted
  • Author
Posted
when your stock injectors cant flow enough fuel to your engine from either turbo increase or just boost pressure you need more fuel to equal the amount of air going in on a ratio...

Yeah i knew that bit :P

...I woulnd tget hi flow ones my old man has had bad expericence with them...

What kind of bad experience? what happened?

45ULT Rising Star

45ULT

Posted
Posted

stock rb25det injectors can be highflowed to approx 650cc with out losing their spray pattern once u go bigger than that ur pattern starts going all over the shop. Mobile Injector Services do these and i think they're roughly $400 and the injectors are pretty much brand new.

R334door Experienced

R334door

Posted
Posted
Yeah i knew that bit :laugh:

What kind of bad experience? what happened?

Well basically the guy who did these ones,( dont want to name anyone except he is from towommba area) didnt do a very good job of them plus its a bit ruthless to do them.The spray pattern is crap,like a turning on a garden house and one of the pintels in the number 4 injector was broken from his bad doing and caused number 4 piston to basically crack the length of it in two.All the fuel was washing oil off the bore,hence causing damage.Spray pattern is important.IM not sure on Rb25 injectors but these were on SR20det ones.

Bunta Grand Master

Bunta

Posted
Posted
Highflowed R34 ones from the US....good option www.deatschwerks.com

they are awesome i had a set of them, they were flow tested a 600cc they were all with in 2cc of each other and gave me mo problems what so ever

blitza Collaborator

blitza

Posted
  • Author
Posted
they are awesome i had a set of them, they were flow tested a 600cc they were all with in 2cc of each other and gave me mo problems what so ever

I just had a look on the site and they look very professional. Are they new OEM injectors that they high flow, pressure test, etc, etc and resell? Is that how it works?

SevenAngryPenguins Proficient

SevenAngryPenguins

Posted
Posted

when i got my injectors cleaned i talked to the injector guy about highflows and he said he wouldn't ever touch them, he said he's seen some good ones but on the most part they we all crap different flow rates etc. Your motor your risk.

Bunta Grand Master

Bunta

Posted
Posted
when i got my injectors cleaned i talked to the injector guy about highflows and he said he wouldn't ever touch them, he said he's seen some good ones but on the most part they we all crap different flow rates etc. Your motor your risk.

thats why when you get them you flow test them :laugh: like i said mine were all within 2cc, if you test them you cant go wrong

mines Rising Star

mines

Posted
Posted
Hey hey,

I'm just looking for some names and numbers of people that highflow std R34 rb25 injectors in Brissie. What are some costs and options???

thanks guys,

Steve

why hi-flow std injectors.

you can buy some aftermarket injector for a bit more money than hi-flow std injectors.

much better way to do and brand new too

cheers

666DAN Grand Master

666DAN

Posted
Posted
thats why when you get them you flow test them :D like i said mine were all within 2cc, if you test them you cant go wrong

Yep, they even have so many cores in stock, they flow test and match a group of 6 so the tolerance between them is very close. I've heard nothing but praise for Deatschwerks, my ones have been running great for a long time now.

They highflow the pintle exactly the same way a manufacturer would, using micron accurate drills an CNC.

SevenAngryPenguins Proficient

SevenAngryPenguins

Posted
Posted (edited)

yeah i nearly got a set of deathworks highflows as well but read more than a couple of bad reports of injectors failing, locking up on the dyno and sorts. But I suppose bad reports are everywhere for everything

Edited by SevenAngryPenguins
Bunta Grand Master

Bunta

Posted
Posted
why hi-flow std injectors.

you can buy some aftermarket injector for a bit more money than hi-flow std injectors.

much better way to do and brand new too

cheers

because they are cheaper and made by the same process and are effectively new

Bunta Grand Master

Bunta

Posted
Posted
Yep, they even have so many cores in stock, they flow test and match a group of 6 so the tolerance between them is very close. I've heard nothing but praise for Deatschwerks, my ones have been running great for a long time now.

They highflow the pintle exactly the same way a manufacturer would, using micron accurate drills an CNC.

dont tell any one else that though...cause when you mention anything besides nismo when it comes to injectors they are apparently shit

blitza Collaborator

blitza

Posted
  • Author
Posted

I just heard they have arrived at my house... why do work days always go for so long?

I grabbed the 600cc variation of them. they are so cheap for brand new, flow tested & matched, 600cc injectors that are a drop in straight fitment... That has to be as good or better than any aftermarket brand injector, right???

And they only cost $550!

:D

666DAN Grand Master

666DAN

Posted
Posted
I just heard they have arrived at my house... why do work days always go for so long?

I grabbed the 600cc variation of them. they are so cheap for brand new, flow tested & matched, 600cc injectors that are a drop in straight fitment... That has to be as good or better than any aftermarket brand injector, right???

And they only cost $550!

:(

Don't forget to send your ones back for cash-back!......another $90in your pocket

Bunta Grand Master

Bunta

Posted
Posted
Don't forget to send your ones back for cash-back!......another $90in your pocket

do they take stock ones off of any one? Or only current customers? i have like 3 sets of RB 25 ones and 2 sets of SR20 ones!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...