Jump to content
SAU Community

Recommended Posts

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

Guest RedLineGTR

Okay Pre-Meet #2

McDonalds© - Corner, Chadstone Road & Princes Hwy (Mel 69 D4)

Time – Meet 8:30am – Depart 8:40am( Roughly ) Then we travel along the Princes Hwy (Dandenong Road) Towards The city which on the way we will join JamesZilla & whoever else is waiting with him (Around The Prahran Area) Then we will continue to the Main Meet point (Refer to First Page).

This meet is for all the people coming from this side of town, like the people who are meeting @ Glen Waverly etc…

You do not have to meet here if you don’t want to, I will be waiting their early having some McBreakfast goodies (I’ll be most likely on the outside tables) I will be waiting till 8:50am at MAX (if worse comes to worse) since that is the time that I have arranged to meet jameszilla about 8:50-9:00am and I really don’t want to keep people waiting.

Whoever feels comfortable to lead the pack to the main meet point be my guest as long as you have a good idea where to go (assume most people have had a look at the melway). I’m going to check over the melway properly so I know exactly where I need to go and set some pace at the front if need be.

Please Tank up fuel either at the Main meet point (Refer to First Page) or before we start cruising from the Chadstone area as I rather not stop until we get to the main point.

The times are set so we get their on time & not be late. Like mentioned before if you want to come to Chadstone McDonalds I’ll be waiting if not that’s fine.

Any questions Pm or email me.

Cheers Rob

The lower speed limits haven't come into effect yet. They are going to be put in around Christmas.

The speed will range from 50-80 depending on how fast you should be going around the corners in certain areas. I had a look at the plans last week. The section between Lorne and Apollo Bay will be they slowest, as it is the tightest.

Rob,

I bought the Meguiar's scratch X and applied it several time with no effect. The scratchs seemed pretty shallow so i thought only the clear coat was scratched... oh well i was wrong.

I'm getting my bumper painted and refitted, hopefully i get car back by Saturday.

Cheers.




  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...