Jump to content
SAU Community

Recommended Posts

Hey guys been havin a bit of trouble with my car.

When at a stop car has a horrible idle, any where from 900rpm to 100 or stall.

Have cleaned aac valve, stock plumb back bov, had a different afm on there (tho was old and could have been crap)

I am buying a new fuel pump this week as well (if that has anything to do with it)

Does any one have any ideas what this could be?

Thanks for replys in advance!

Link to comment
https://www.sau.com.au/forums/topic/215162-out-of-ideas/
Share on other sites

did it only start playing up since you cleaned the aac valve? idle may not be adjusted properly

did you also clean up the cold start valve? thats the one under the throttle body.

also sounds like its a good possibility you have a vacuum leak.

Link to comment
https://www.sau.com.au/forums/topic/215162-out-of-ideas/#findComment-3800153
Share on other sites

I dont really know what maintenence has been performed on the car but if it were me I would be starting with the spark plugs...pull them out and check general condition gaps etc..then as I am reassembling all that I would pay close attention to the coil packs, any corosion on the connection where it meets spark plug ? squirt of WD40 may help.....good starting point as I am thinking if its a fuel issue you would have problems under load.....Unless you got a partially blocked injector or something...but start with the spark...I think the problem is there

Link to comment
https://www.sau.com.au/forums/topic/215162-out-of-ideas/#findComment-3800160
Share on other sites

I dont really know what maintenence has been performed on the car but if it were me I would be starting with the spark plugs...pull them out and check general condition gaps etc..then as I am reassembling all that I would pay close attention to the coil packs, any corosion on the connection where it meets spark plug ? squirt of WD40 may help.....good starting point as I am thinking if its a fuel issue you would have problems under load.....Unless you got a partially blocked injector or something...but start with the spark...I think the problem is there

it also stalls if slowing down to a stop and i put the clutch in sometimes. its more hunting then anything (can see the boost gauge rise and fall on vaccum??)

Link to comment
https://www.sau.com.au/forums/topic/215162-out-of-ideas/#findComment-3800179
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...