Ic Bead Roller

[fatz]

i need a bead roller for my ic pipes

only one ive found is below 550 delivered (looks like a good bit of gear)

http://www.pro-tools.com/m2.htm

anyone one know of somthing similar

i need to make nice beads on 3 inch mild and staino bends

cheers

pete

[fatz]

oh and i cant spell

[VB-]

checked eGay?

[Craved]

pete

Hare and Forbes (www.machineryhouse.com.au) has Swage and jenny's with 175mm throat for 0.7mm mild steel for $395

they are in northmead

[fatz]

pete

Hare and Forbes (www.machineryhouse.com.au) has Swage and jenny's with 175mm throat for 0.7mm mild steel for $395

they are in northmead

you champion ill check it

[W0rp3D]

i need a bead roller for my ic pipes

only one ive found is below 550 delivered (looks like a good bit of gear)

http://www.pro-tools.com/m2.htm

anyone one know of somthing similar

i need to make nice beads on 3 inch mild and staino bends

cheers

pete

that link says its $295

[Beer Baron]

that link says its $295

yes... USD + freight.

[rb26s13]

ive been looking around for a decent one for a while now for the right price that can handle doin 1.6mm stainless pipe.. havent found one yet goin to look at making one in the upcoming months/weeks

[Craved]

getting into a couple of grand for ones for 1.6mm

[rb26s13]

getting into a couple of grand for ones for 1.6mm

that is why im looking at making one rather than putting a bead of weld around the end of the pipe

[6 SPD SX]

that is why im looking at making one rather than putting a bead of weld around the end of the pipe

If you make one post up how u did it!!