Jump to content
SAU Community

Recommended Posts

Hey all,

I'm interested in learning more about suspension setup, doing my own alignments etc. Just wondering what experience people here have with any suspension literature? Basically looking for an all in one book to teach me the ins and outs of setting up my track car, as well as my road car.

Has anyone read this?: http://www.pitstop.net.au/view/technical-c...query/plu/1734/

Cheers

Dane

Link to comment
https://www.sau.com.au/forums/topic/215743-suspension-literature/
Share on other sites

The problem is that most books fall into two categories.

1. Too basic.

2. Too mathematical.

The one you have is probably the former, but add to the fact that it is horribly out of date also.

If you want a recommendation some of Carroll Smiths stuff is ok (But similarly dated). Try either of these:

http://www.amazon.com/Tune-Win-Carroll-Smi...9845&sr=1-2

http://www.amazon.com/Drive-Win-Essential-...9871&sr=1-4

If you want to risk an aneurysm go with Millikens tome:

http://www.amazon.com/Race-Car-Vehicle-Dyn...d_sim_b_title_4

Remember thought, the key to it is as much about understanding tyre behaviour as understanding chassis behaviour.

Edited by djr81

The problem is most books don't spend enough time on the implications of changing the geometry on various types of suspension. eg you wont find things such as don't lower a car with a McPherson strut front end to the point that the LCA is horizontal or inclined upwards.

This sort of thing can sometimes be useful:

http://www.racingaspirations.com/suspensiongeometry.php

The ones I refer to most in my library;

Tune to Win - Carrol Smith

Drive to Win - Carrol Smith

Saloon Car Race Preparation - Nigel MacKnight

Performance Handling - Don Alexander

Competition Car Suspension - Allan Staniforth

Race Car Engineering & Mechanics - Paul Van Valkenburgh

I have found that there is no one book that covers it, the ones that may on the surface appear to be out of date still have lots of relevance and even the heavily scientific ones have some basic stuff that anyone can grasp even if you ultimately ignore the formulas.

Cheers

Gary

Thanks fo rthe tips all, I'll have a flick through some of them and work out which is best for what I'm looking for.

The Carroll Smith books seem to have a good rep, so that might be the go. I think it will still be relevant for the type of info I'm chasing.

Cheers

Dane

Performance Handling by Don Alexander is quite a helpful one, not too complex, not too simple. A fair amount of stuff in there on tuning with tyre temps, which I thought was pretty handy, although I'm not sure how handy it would be in real life as it's not often you come into the pits hot.

Milliken's probably a bit much for what you want, is mostly for design and endless calculations rather than anything incredibly helpful for tuning. Tyres, Suspension and Hanlding by Dixon is much the same thing.

Have you had a look at my thread?

http://www.skylinesaustralia.com/forums/Su...ic-t161623.html

Might find something useful in there... Maybe...

Oh, and this guy writes articles for Racecar Engineering, lot of PDFs there, decent amount of theory, and a fair bit of practical stuff too. Just found it the other night, been reading heaps :)

http://rejsa.nu/forum/viewtopic.php?t=40875

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...