Jump to content
SAU Community

Recommended Posts

That's very cool! What functions are working/not working on it?

That would have been some hard core wiring job.

Nissan offered it as a optional feature for all r34's (obiously came with the GTR). The wiring would be A1 :)

Nissan offered it as a optional feature for all r34's (obiously came with the GTR). The wiring would be A1 :P

GT-R center (LCD - non-popup) display is exclusive to GT-R only.

All other R34s had optional (popup) DVD/TV screens - which looks totally different.

-> Aznbongsta's one seems to have the GT-R version - which is quite amzing IMO.

GT-R center (LCD - non-popup) display is exclusive to GT-R only.

All other R34s had optional (popup) DVD/TV screens - which looks totally different.

-> Aznbongsta's one seems to have the GT-R version - which is quite amzing IMO.

Yeah i should have explained myself better.

Nengun sold it for $2,518 delivered and it came with a easy too do wiring diagram. Nissan japan would wire it for r34 owners but in Australia it was harder too get it wired

This jap site has the wiring diagram http://www.hkskylineclub.com/new/forum_pos...3160&KW=MFD

one of the nicest 34s out there mate nice work.

one thing id change, clear / smoked side indicators and possibly lower it just a tiny little bit, only if you have coilovers tho :cheers:

Hey! Yea i might just get the side indicators spray tinted, as for the clear front, nah cbf! LOL

Lowering it? I love to but then that means the front lip will always scrap, it already scraps nearly everywhere I go with a slight angle entrance or exit

Edited by Aznbongsta
That's very cool! What functions are working/not working on it?

That would have been some hard core wiring job.

What works? Nothing! I only got the cover, I put something else in there but that remains a SECRET! HEHE

Black on White looks so much better. Seen your car when your wheels were white.

Just curious, where did you get them painted or powdercoated?

I had to get it repaired too, I took it to C&D panels in Sunshine, Its painted instead of powdercoated

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
×
×
  • Create New...