Jump to content
SAU Community

R34 Gtt Rough Idle Only


Recommended Posts

Guest TR34GT

Hi SAU Members,

I've read a fair bit about R34 GTT's running rough at idle.

The answers have ranged from:

  • Airflow meter plug check
  • Check ignition coil packs and replace if necessary
  • Boost leakage check
  • Airflow meter clean
  • Loose intake pipes check

My GTT has been running perfectly................up till yesterday. Now I've got the shakes at idle as well.

The only thing that has ben done to the car before the problem started, was the installation of the induction box we built.

(but I don't see that this could be causing the problem)

I need to know if getting a diagnostic check on the car is really the first thing that should be carried out, so that a whole heap of money isn't wasted on coil packs, etc.

Many thanks

TR34GT (Jim)

Link to comment
https://www.sau.com.au/forums/topic/215869-r34-gtt-rough-idle-only/
Share on other sites

Well its next to the AFM so perhaps that jim?

What idle is it? Does it hunt the idle varing idle slightly as if the air con is on?

Does it idle better or worse on a hill?

Does the car feel slugish?

Edited by DECIM8
  • 2 weeks later...
Guest TR34GT
Well its next to the AFM so perhaps that jim?

What idle is it? Does it hunt the idle varing idle slightly as if the air con is on?

Does it idle better or worse on a hill?

Does the car feel slugish?

DECIM8,

The problem was solved in accordance with the attached car care data sheet.

It was the bloody vaccum line. (annoyed that I missed it at night)

Many thanks.

Jim

CDS_No_2___Engine_Running_Rough_at_Idle_and_Load.pdf

Edited by TR34GT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...