Jump to content
SAU Community

Rb25 Neo Turbo On Rb20det,

flake32

By flake32,
in Western Australia

 Share

Recommended Posts

flake32 Collaborator

flake32

Posted
  • Author
Posted
just thinking is it worth the $800 for a remap?,has any one heard of engine failure due to this?..just wana do the righty by my engine...thanks

by the way the car is running 10psi,and has a big fuel pump,i have been giving her a bit of a thrashing lately, hope ive done no damage......

QWK32 Veteran

QWK32

Posted
Posted
just thinking is it worth the $800 for a remap?,has any one heard of engine failure due to this?..just wana do the righty by my engine...thanks

it might be ok. i was running a stock r33 rb25 turbo on my rb20 and untuned it was leaning out slightly on 13psi above 5500rpm. only to like 13.5:1 afr. your running less boost so it might not be leaning out too much but i think its best to get it atleast checked with a wideband o2 sensor just to know whats going on.

but if you really want to do right for your engine go for a remap, if not a safc.

daineisdabomb Collaborator

daineisdabomb

Posted
Posted

it will b ok as the afm will compensate for the extra volume of air entering the engine. although u will find it will b running a lil lean as the boost has been raised. but it will do this even with the stock turbo. fittin a apexi SAFC-2 will fix this n b cheaper than a remap. it will also give u more top end power as the a/f ratio will b at a more power productive level. remember tuning is the most important aspect of the power and engine makes. an engine could hav all the bolt on's in the world but its the amount of fuel and air, and when it is ignited that makes the power

bubba Grand Master

bubba

Posted
Posted (edited)

Absolutely fine, I ran my RB20 with a series1 33 turbo for nearly a year on 12psi and regular heavy beatings :D

Oh and unless your fuel pump is dying (which it's likely not as you say it's got a bigger one) it's likely running rich as opposed to lean, what an SAFC will do for you is a cheap way to lean it out a bit and gain some more top end power.

I didn't bother with any of that shit and waited till I got the 30 in before I got it tuned properly (remap).

Edited by bubba
Douse Collaborator

Douse

Posted
Posted (edited)

I am about to put in a RB25 turbo from an R34 on to my RB20, and I was advised to get it tuned straight away as it will throw out all the air to fuel ratios......

If you boost the RB25 turbo to 12-14 psi, i would be a little concerned about it leaning out......

Edited by Douse
QWK32 Veteran

QWK32

Posted
Posted
I am about to put in a RB25 turbo from an R34 on to my RB20, and I was advised to get it tuned straight away as it will throw out all the air to fuel ratios......

If you boost the RB25 turbo to 12-14 psi, i would be a little concerned about it leaning out......

it will but not by much. the extra flow will be picked up by the afm and the ecu will do its best. like i posted earlier i was seeing afr's of around 13:1 on 13psi, so not too bad.

bubba Grand Master

bubba

Posted
Posted (edited)

My 20 w/25 turbo with stock fuel pump was seeing around 13.5:1 but boy did it go like a shower of shit heh.

Was pretty lean so did the fuel pump and untuned it made 246rwhp (@12psi) so I was pretty happy.

A tune will pretty much get rid of some of the lag (by smashing in timing down low) but I didnt see the need at that level, I preferred to save my money for the 30+bits.

Edited by bubba
Bunky_r31 Enthusiast

Bunky_r31

Posted
Posted

i ran a 34 neo turbo on my redtop 20 for ages with no tune, was very very rich, when it did go on the dyno the afr's dropped of the scale to below 10:1

got an old style safc tuned on it and picked up 50hp and heaps better fuel economy:)

ACTIV32 Collaborator

ACTIV32

Posted
Posted (edited)

hey guys while the suject is up i also put a r33 stock turbo on my rb20 and its untuned i havnt been thashing it but whenever i do give it some it has no power since the new turbo is that normal

Edited by ACTIV32
ACTIV32 Collaborator

ACTIV32

Posted
Posted
No that's not normal, can you quantify "no power"?

yer well the power is probally equal to a stock r32 with its original turbo

i put it in my self and i checked everything twice i dunno, bizzare

i thought you had to get a tune for it to start giving th correct boost

bubba Grand Master

bubba

Posted
Posted

Yeah did you use the actuator off your original turbo or off the new turbo?

R33 actuator is 5psi, R32 is 10psi. If you are using the R33 actuator and do not have a boost controller of some sorts then yes, it will feel rather gutless :thumbsup:

ACTIV32 Collaborator

ACTIV32

Posted
Posted
Yeah did you use the actuator off your original turbo or off the new turbo?

R33 actuator is 5psi, R32 is 10psi. If you are using the R33 actuator and do not have a boost controller of some sorts then yes, it will feel rather gutless :rofl:

well there is my problem i was going to use the old acuator but i think thats whats blew up my stock turbo and yer t is stock cheers for the help guys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Duncan
      What brakes on R34 GTT(Europe)

      By Duncan · Posted

      Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • 04-LOOX
      R34 GTR Vspec Garage Sale - All must go!

      By 04-LOOX · Posted

      Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...