Jump to content
SAU Community

Recommended Posts

hey guys

i have some r33 rims on my R32 at the moment and i picked up a Set of r32 rims for $100 bucks with rubber. i was thinking of powder coating them black, as I’m going paint my brake callipers red. What do you guys reckon would work best with the rim colour, some said do shadow chrome and others said get a chrome machined lip.

any way i have attached a picture of my car, so you can see the paint colour let me know what you guys think and what colour would work best.

My Car

post-44649-1208863789_thumb.jpg

What it might look like?

post-44649-1208863853_thumb.jpg

Thanks niran

Edited by niran
Link to comment
https://www.sau.com.au/forums/topic/215982-what-color-rims/
Share on other sites

Yeah I like that whole stealth look when you lower the car on stock rims then paint it black.

Looks seriously TUFF!

And get rid of that, what looks like to be a R33 GTR spoiler and take that Nissan sticker off ya windscreen.

Link to comment
https://www.sau.com.au/forums/topic/215982-what-color-rims/#findComment-3815465
Share on other sites

ahahahah! yer the spoiler was on there from the guy i bought the car off. i havnt botherd to remove it incase its a different color under there, and i dont have the money to paint the car back agian if it is. so yer have to remove it when i do a respray off the car.

Link to comment
https://www.sau.com.au/forums/topic/215982-what-color-rims/#findComment-3815471
Share on other sites

hey guys yer. ill have to see about the spoiler thing. but abu whos car is you'r friends the first car" my car" or the one i used as a "maybe could look like" car ahaha.. also yer ill remove the spoiler and see what color its under there.

so far black rims is the way :(..

thanks guys niran

Link to comment
https://www.sau.com.au/forums/topic/215982-what-color-rims/#findComment-3816891
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...