Jump to content
SAU Community

Kkr 430 Potential? Will Screamer Bolt On It?

twofortyrida
 Share

Recommended Posts

twofortyrida Rookie

twofortyrida

Posted
  • Author
Posted

Damn thats right I forgot about the v-band. That turbo is a beauty. Ben Ellis at Otomoto gave me some info I liked. He said it will start boost around 2800 and makes 10psi at 3500. He said it will happily support 300whp. $770 US shipped is really cheap for such a turbo. Looks like no screamer or open wastegate for me. Thanks for replies.

Al Grand Master

Al

Posted
Posted
Damn thats right I forgot about the v-band. That turbo is a beauty. Ben Ellis at Otomoto gave me some info I liked. He said it will start boost around 2800 and makes 10psi at 3500. He said it will happily support 300whp. $770 US shipped is really cheap for such a turbo. Looks like no screamer or open wastegate for me. Thanks for replies.

MAKE SURE YOU GET A MONEY BACK GUARANTEE.....

Don't believe everything a sales person tells you :D

In my option, they are a cheap shit turbo and are VERY laggy for the power they produce.

300whp=220wkw

You will be much better off finding a HKS GT2530 or GT2535; or a Garrett equivalent.

twofortyrida Rookie

twofortyrida

Posted
  • Author
Posted

True but I'm looking for a direct bolt on to factory mani. Just something that will put down 300whp efficiently. If someone can modify the stock mani to accept a wastegate that will work too. I'm not trying to spend 500+ on a mani with those power levels.

Al Grand Master

Al

Posted
Posted
True but I'm looking for a direct bolt on to factory mani. Just something that will put down 300whp efficiently. If someone can modify the stock mani to accept a wastegate that will work too. I'm not trying to spend 500+ on a mani with those power levels.

The turbos i mentioned are direct bolt ons, to the factory manifolds. The HKS turbos can come as a complete kit, so you don't have to spend more money on water/oil lines, dump pipes, intake pipes, fmic piping, etc.

Why go external gate on such a low power goal? Better to keep it internal, when you consider epa, defects, etc.

esky_mad Proficient

esky_mad

Posted
Posted

going with the KKR and custom or just off the shelf lines will still work out heaps cheaper than an HKS turbo kit.

alot of people dont like them because failures have been well documented. ive never used one so i cant speak from experience. a ball bearing garret unit isnt much more expensive.

a mate had the 430 on his RB20 cefiro with a microtech ecu. it was tuned very rich and made 210rwkw on 20psi. far from massive power but 220 is definetly achieveable.

theres also no reason why you cant have an external gate. alot of guys in nz use external gates on the original manifold. the 430 is more than big enough to utilise an external.

our 180 has a TD05 16g, a fairly small turbo with a monster trust external gate.....

plus external gates sound very cool.

goodluck. :down:

Adriano Grand Master

Adriano

Posted
Posted
Damn thats right I forgot about the v-band. That turbo is a beauty. Ben Ellis at Otomoto gave me some info I liked. He said it will start boost around 2800 and makes 10psi at 3500. He said it will happily support 300whp. $770 US shipped is really cheap for such a turbo. Looks like no screamer or open wastegate for me. Thanks for replies.

I would want even that response in writing, ive tuned a few, and havnt found the response or boost threashold to be great.

stolen_s15 Mentor

stolen_s15

Posted
Posted
MAKE SURE YOU GET A MONEY BACK GUARANTEE.....

Don't believe everything a sales person tells you :cheers:

In my option, they are a cheap shit turbo and are VERY laggy for the power they produce.

300whp=220wkw

You will be much better off finding a HKS GT2530 or GT2535; or a Garrett equivalent.

+1

90% or more of reports show people NOT happy with these turbos after purchase.

twofortyrida Rookie

twofortyrida

Posted
  • Author
Posted (edited)
+1

90% or more of reports show people NOT happy with these turbos after purchase.

Thanks for responses. I'm now considering a gt30r or a tdo6-20g(If I desired more power its there). I don't mind a bit/alot more lag(save gas off boost :thumbsup: ). I want an external because I would trust it better than an internal and like esky_mad said it sounds cool. Nothing sounds like an external wastegate opening at 20psi. This car is just something to have a blast in. If I like it, I like whether its function or form.

Edited by twofortyrida
twofortyrida Rookie

twofortyrida

Posted
  • Author
Posted
maybe also look at a GT28RS/GT2530/GCG RB25 High-Flow.. should get you around the power figure u want with supporting mods =]

But will they pull to 8k? Again no reason for 8k other than thats where I want to take it. I was looking at a GT3076R. Will it bolt to stock mani with a spacer? I need some more info on the tdo6-20g as well. Whats its efficiently range?

cosmokram3r Proficient

cosmokram3r

Posted
Posted (edited)

Not 100% sure if they pull to 8K someone else would have to clarify on that one, i just know their the most responsive/low amount of lag turbo's that are direct bolt on for an RB20 that pull hard early (no v-band required just oil/water lines would most likely need to be changed) and they reach about the 230rwkw mark. Good luck on the hunt =]

Edited by cosmokram3r
twofortyrida Rookie

twofortyrida

Posted
  • Author
Posted
Not 100% sure if they pull to 8K someone else would have to clarify on that one, i just know their the most responsive/low amount of lag turbo's that are direct bolt on for an RB20 that pull hard early (no v-band required just oil/water lines would most likely need to be changed) and they reach about the 230rwkw mark. Good luck on the hunt =]

Thanks man. I want to go ahead to get a turbo efficient to 20lbs or so. I want a 17-20lbs from 4000-4500 to 8k or more. My ka just would run out of steam too early for me because of rpm limitations.

Beer Baron Grand Master

Beer Baron

Posted
Posted

do you have an SR20? either way I am running a trust T518Z on my SR20 it's currently making 226rwkw on about 16/17psi (from memory). pulls very hard and comes on very nicely. great little turbo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Murray_Calavera
      WTAC 2025

      By Murray_Calavera · Posted

      Yeah mate, never miss it.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Any going to watch World Time Attack at SMSP this year?
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
    • zillah
      Recommendation for engine oil funnel spill free

      By zillah · Posted

      hahaha good on
×
×
  • Create New...