Jump to content
SAU Community

Key Blanks For R34 Skylines !

Ryan.R34

By Ryan.R34,
in Queensland

 Share

Recommended Posts

Ryan.R34 Community Regular

Ryan.R34

Posted
Posted

Hi guys,

When I bought my R34 it came with 1 key, by the sounds of it this is the norm for imports and I looked around everywhere to get a duplicate at key cutters, hardwares and locksmiths with no luck.

If you need a spare key blank or a few of them email [email protected] with the amount of key blanks you need and they will send you an electronic invoice for the quantity of keyblanks you need to your email address. Then when you receive the invoice pay it thru PayPay using your Credit Crad or PayPal account.

From what they tell me the R32 and R33's have a standard Australian release Nissan Key that can be cut anywhere. R34 key blanks are a little rare.

Order and pay for your keys and it will be sent out the next bussiness day, you'll have it within 48hrs within Queensland @ $4 a blank + shipping ( 60c )

The blank is what they call a 'Surf Key' it is the blank without the plastic remote head. Atleast this is something to work off if you lose your car keys altogether and you can get into your car.

Cheaper than losing your keys and getting someone out to cut them from scratch.

Order your key blanks like I did and take it to your local key cutter to duplicate it for you, it cost me 50 cents.

Cheers.

:D

Link to comment
https://www.sau.com.au/forums/topic/216821-key-blanks-for-r34-skylines/
Share on other sites
Ryan.R34 Community Regular

Ryan.R34

Posted
  • Author
Posted
Thats great Ryan... Good find... :D

Hi bud, I have been away working for a while good to be back. These guys have key blanks for everything and respond to you within 24hrs . They had key blanks for my mates porsche. He found a guy with the machine to cut them but he had no one to supply him with the actual key blank. The key blank from Porsche was $80 and got it from these guys for $12.50

Anyway, time to pull the girl out of the garage and go for a spin ! :P

Silver_R34_GT-T Grand Master

Silver_R34_GT-T

Posted
Posted

yeah ive been interested in a second key, I had a lanyard attached to my keys, and one day i stepped on it when getting into the car :D i had to take it apart and re fit to make right, scared i might break my only key again (maybe to a point where i cant fix) i spoke to nissan, who told me 400 bucks for a key, then another 60 to get it to work for my car :|

85URK Grand Master

85URK

Posted
Posted
yeah ive been interested in a second key, I had a lanyard attached to my keys, and one day i stepped on it when getting into the car :D i had to take it apart and re fit to make right, scared i might break my only key again (maybe to a point where i cant fix) i spoke to nissan, who told me 400 bucks for a key, then another 60 to get it to work for my car :|

i did the exact same thing with my key had the lanyard attached, and i got caught on it whilst hopping into the car bent the key couldnt even fit it in the ignition, so when i tried to straighten it snapped in 2, had to call up my parents to bring out the spare luckily i had one already and wasnt too far from home, but dont use lanyards they are dangerous.

Silver_R34_GT-T Grand Master

Silver_R34_GT-T

Posted
Posted
i did the exact same thing with my key had the lanyard attached, and i got caught on it whilst hopping into the car bent the key couldnt even fit it in the ignition, so when i tried to straighten it snapped in 2, had to call up my parents to bring out the spare luckily i had one already and wasnt too far from home, but dont use lanyards they are dangerous.

hahah yeah, luckily mine didnt bend the metal, it bent from where the metal goes into the plastic bit, i simply unscrewed and re aligned :banana: fixed

Granthem Mentor

Granthem

Posted
Posted

i Recently sent my original key to harvey norman in a box. it then went to brisbane, has been found and is hopefully on its way home to me.

However in the mean time Miller Scott managed to cut me spares.

The key they used to copy my R34 key is a SILCA Italy key, and the number is NSN 14. So find someone who stocks those keys (pretty sure most keysmiths use these blanks) and you will get your R34 Keys copied.

Mine took 2 mins and cost 6 bucks each, cut and ready :banana:

this might also help some people

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • davemoto63
      My new to me M35 Stagea wagon

      By davemoto63 · Posted

    • davemoto63
      My new to me M35 Stagea wagon

      By davemoto63 · Posted

      Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...