Jump to content
SAU Community

Recommended Posts

hi guys, i'm really new in this forum. i join this forum because i really like and love nissan skyline, especially R32.

as far as i know, you guys have more expirience about nissan than me.

so i'd like to ask you guys some question

1) how hard it is to maintain 15year-old R32?

2) what do you rekon r32 for first car?

3) is r32 good for drift?

4) would you buy it from local dealer or import from japan?

sorry if i'm bugging u. i've done some research on r32, but it doesn't answer all of my questions.

thank you guys

cheers

Link to comment
https://www.sau.com.au/forums/topic/216956-need-some-info-bout-r32/
Share on other sites

hi guys, i'm really new in this forum. i join this forum because i really like and love nissan skyline, especially R32.

as far as i know, you guys have more expirience about nissan than me.

so i'd like to ask you guys some question

1) how hard it is to maintain 15year-old R32?

2) what do you rekon r32 for first car?

3) is r32 good for drift?

4) would you buy it from local dealer or import from japan?

sorry if i'm bugging u. i've done some research on r32, but it doesn't answer all of my questions.

thank you guys

cheers

1) same as maintaining any other car. just make sure you do a service every 5000kms

2) my r32 was my first car

3) i don't know, ive never drifted my car but it can drift. have had a race driver drive my car and drift it so i know its not too bad

4) i bought mine privately, but i guess, look hard for a clean one. you would regret it later on if you just run out there and buy the first one you see

yes i've checked yours Courtney

but i don have dat much money, i'm planning to but a standart and good condition r32 and add some more when i got some money

i read your description about your r32

and is it hard to maintain your r32?

if i want to build it for drift do you rekon i should buy GTR or GT-t will do??

thanks guys for your reply

cheers

Edited by very_noob
hi guys, i'm really new in this forum. i join this forum because i really like and love nissan skyline, especially R32.

as far as i know, you guys have more expirience about nissan than me.

so i'd like to ask you guys some question

1) how hard it is to maintain 15year-old R32?

2) what do you rekon r32 for first car?

3) is r32 good for drift?

4) would you buy it from local dealer or import from japan?

sorry if i'm bugging u. i've done some research on r32, but it doesn't answer all of my questions.

thank you guys

cheers

1) Are you getting a GTS / GTS-T / GTR? Either way it will cost you money, like any 15 year old car, things will have to be changed then maintained.

2) Sooner the better / more experiance and just go easy on the right foot. Take it slow and get use to the car before doing anything crazy.

3) Good for drift if you want more torque but the CA18DET or SR20DET (S13, S14, S15, 180SX) will be better.

4) Reasearch into what you are buying, I preffer local dealer as I can see the car in person, bring my mechanic to check it out as to reading whats on the import / auction sheet and hoping everyword is legit.

yes i've checked yours Courtney

but i don have dat much money, i'm planning to but a standart and good condition r32 and add some more when i got some money

i read your description about your r32

and is it hard to maintain your r32?

if i want to build it for drift do you rekon i should buy GTR or GT-t will do??

thanks guys for your reply

cheers

Just as long as you know you won't get your money back...

I am finding that now. I spent $, but really, when it comes to selling it on, how much you spent doesn't make as much difference as you would think.

Not hard to maintain. I would sugesst when you get the car though, make sure you find out when the timing belt, pulleys, tensioner kit, top n bottom seals, water pump etc were last changed. Thats important to know (usually 100,000k service). If you need to do all this, could cost you anywhere from 800 onwards, depending where you go. If its an importer or dealer, I would check the belt at least anyway, regardless of what they say, as it has probably had the k's wound back and you can't talk to the previous owner. You may also want to check castor rods, bushes etc.

GTR is 4wd, you don't want that. You will have a very hard time learning to drift in a 4wd. That said, you can disable the front end if you really wanted. R34 GT-T is heavier than 32, but with any rear wheel drive car you can do some degree of drifting...

You seem pretty set on this drifting idea, is this to eventually compete, or just for personal use, n maybe a few friday nights at driftland? If you want to build a 'hectic' drift car you are much better off starting with a silvia/200sx or 180sx as I said before :down:

Edited by Courtney

The HCR32 Skyline debuted in May 1989. It was available as either a 2-door coupe or 4-door sedan/saloon, all other bodystyles were dropped. It featured several versions of the RB-series straight-6 engines, which had improved heads (the twelve port inlet was gone) and used the ECCS (Electronically Concentrated Control System) injection system. Also available were an 1800 cc 4 cylinder GXi model. Most models had HICAS four wheel steering, with the rear wheels being hydraulically linked to the front steering. The 2.5 litre version became one of the first cars made in Japan to feature a 5 speed automatic transmission. The GTS-t Type M included larger five-stud 16 in wheels, four piston front callipers and twin piston rears. ABS was optional (except for the GT-R), viscous LSD was standard on all turbo models and optional on all but the GXi.

R32 Models:

* GXi Type-X - 1.8 L CA18i I4, 91 hp (67 kW)

* GTE Type-X - 2.0 L RB20E I6, 125 hp (93 kW, 152 N m)

* GTS Type-X, S, J - 2.0 L RB20DE I6 155 hp (115 kW, 154 N m)

* GTS-25 Type-X, S, XG - 2.5 L RB25DE I6, 180 hp (132 kW, 231 N m)

* GTS-t Type-M - 2.0 L RB20DET turbo I6, 212 hp (158 kW, 263 N m)

* GTS-4 - 2.0 L RB20DET turbo I6, 212 hp (158 kW, 263 N m)

* GTS-4 - 2.6 L RB26DE I6, 225 hp (169 kW, Autech Version - auto only

* GT-R - 2.6 L RB26DETT twin-turbo I6, 280+ hp (186 kW, 368 N m) also NISMO, V-Spec and V-Spec II variants.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...