Jump to content
SAU Community

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Exedy 5 puk clutch - used for about 3000 kms... hardly worn, couldn't hold the 300rwkw... was fine at 270rwkw though!

$300 ono

still got it??

will pay now!

NPC rebuilt OS Giken TS2 twin plate clutch - Basically brand new except the splines are damaged on the friciton plate (riveted hub needs replacing on one of the plates) - push type $500 firm

where is npc at?

how many kays since rebuilt??

cheers

NPC rebuilt OS Giken TS2 twin plate clutch - Basically brand new except the splines are damaged on the friciton plate (riveted hub needs replacing on one of the plates) - push type $500 firm

where is npc at?

how many kays since rebuilt??

cheers

NPC are in QLD.... although you don't need to get it repaired there. Although would be the cheapest option.

http://www.npcperformance.com.au/

1500km at most.... splines were damaged due to faulty input shaft... uploading some photos now..

npc rebuilt (jacobson spec plates)

os giken ts2bd. (not damperd anymore)

post-19586-1211797006_thumb.jpgpost-19586-1211796902_thumb.jpgpost-19586-1211796749_thumb.jpgpost-19586-1211796510_thumb.jpg

the "g box" one has the dammaged spline. pulled out due to motor rebuild. drove fine but upgrded to a r3c.

advan 048 semi slick race tyres.

20% worn. $385 a set. ($450 each new lol)

235-45-r17. medium/hard compound.

post-19586-1211797499_thumb.jpg

post-19586-1211798484_thumb.jpg

these have been used for 1 practice session at barbagallo.

porsche cup car slicks.

24-64-18.

aka 240-40-18.

these are almost completly new. again used for only one practice session. new tread depth is 3.1mm the LOWEST on these is 2.4mm.

so around 15% worn on average.

$600 a set.(4) ($550 each new)

post-19586-1211799376_thumb.jpg post-19586-1211799560_thumb.jpg

6 available total. (2 on hold.)

also available is the rear. big ass gibson gtr size. (if you can fit 275's under the rear of you car these will fit.)

27-68-18.

aka 270-45-18.

also only about 15% worn.

350 a pair.

post-19586-1211800073_thumb.jpg post-19586-1211800894_thumb.jpg post-19586-1211801011_thumb.jpg

r32 gtr gearbox partly dissasembled.

smashed input shaft. suit rebuild or gearset upgrade.

$250 post-19586-1211859433_thumb.jpg post-19586-1211859312_thumb.jpg

r32gtr gearbox smashed 3rd. complete un-opened.. suit gearst upgrade or rebuild. still drives fine with no noises except no 3rd lol.

$350 post-19586-1211859605_thumb.jpg

in the first post theres the 32GTR box and the 33GTS-4. but you've listed 2x 32GTR boxes?

is there a typo?

interested in the 33 box but not the price.

advan 048 semi slick race tyres.

20% worn. $385 a set. ($450 each new lol)

235-45-r17. medium/hard compound.

post-19586-1211797499_thumb.jpg

post-19586-1211798484_thumb.jpg

these have been used for 1 practice session at barbagallo.

hey there

20% worn meaning theres 80% left still??

thanks

in the first post theres the 32GTR box and the 33GTS-4. but you've listed 2x 32GTR boxes?

is there a typo?

interested in the 33 box but not the price.

They are one of each, but are the same thing. Only difference is the 33 bell housing is more strengthened than a 32 one. Both are push type, both suit a 32 GTR...

Pm offer, these boxes are Daves not mine so it isn't my call :down:

hey there

20% worn meaning theres 80% left still??

thanks

Yes, there is still 80% left :down:

ok, first post updated as of 6.6.08....

All irrelevant posts of mine have been deleted to clean the thread (ie sold items)

Cheers

Anna

If they are not picked up i will take them, need to be sent to Vic though

Hey Roy,

no dramas, il let you know if they don't get collected :)

Can work out freight etc then

mind shooting me a pm of the Rb26 please ? :( thanks! :D

no dramas, Il get Dave to send you one today. :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The part where you claim the car "is done" means you won't...
    • Johnny is sad now... Because you didn't get Bosch Motorsport ABS.  
    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
×
×
  • Create New...