Jump to content
SAU Community

Recommended Posts

replacing the stock rims with a set of 18x8.5's What's the recommended size of tyre for this size/width of wheels? I'll do the research on the tyre brands myself as there'a a LOT of discussion in that big sticky thread above .. I just need to know the right size. Cheers

Also if someone could just quickly explain the tyre size lingo and what it means that'd be cool ie. 235/40/R17 (or some such)

Link to comment
https://www.sau.com.au/forums/topic/217150-what-size-tyres/
Share on other sites

anyone?? looks like I might be getting my new rims today so i'll need to go out and buy some rubber .. I've pretty much decided on Federal SS 595's but I'd like to know what size I'm looking at so as to be able to ring around and find the best price.

Link to comment
https://www.sau.com.au/forums/topic/217150-what-size-tyres/#findComment-3835253
Share on other sites

Im running Federal SS 595's on my stock rims atm and they are a great tyre for the price.

Im running 235/45/17

Im no expert but here is my basic understanding

235 is the width

45 is the sidewall height in relation to the width

17 is obvisouly the rim size.

I've heard you can go as big as 275's on the back of r34's but you'd probably have to get your guards rolled. Im going 265/30/19's on the front and 235/35/19 on the back with my new mags and i'll be getting mine rolled to be safe.

Link to comment
https://www.sau.com.au/forums/topic/217150-what-size-tyres/#findComment-3835284
Share on other sites

I've heard you can go as big as 275's on the back of r34's but you'd probably have to get your guards rolled. Im going 265/30/19's on the front and 235/35/19 on the back with my new mags and i'll be getting mine rolled to be safe.

you mean you're going 235 at the front and 265 at the rear or are you really putting wider tyres at the front? Speaking of which, why is it so common to see people put wider tyres at the back when the rim width is the same ??

Link to comment
https://www.sau.com.au/forums/topic/217150-what-size-tyres/#findComment-3835493
Share on other sites

well my new rims are here all ready to go yay! Now I just need to decide on the tyres ... I see a lot of good responses on the Federal 595SS so I might as well go with the flow. Now just to find the right size

The stock rims are only 17x7.5 but the tyres on them are 225/45/17 - thats like 8.85" wide tyre..doesn't that seem a bit wide for a 7.5" rim?

Edited by Delta Force
Link to comment
https://www.sau.com.au/forums/topic/217150-what-size-tyres/#findComment-3835583
Share on other sites

what about 235/40/18 on the fronts and 255/35/18 on the rears? Or would that be too weird a setup?

that would give me a 1cm larger diameter at the FRONTS and 1.5% in speed difference (rears faster) and 0.5cm difference in sidewall height (fronts higher)

Edited: fronts were meant to be 235/40 not 45

Edited by Delta Force
Link to comment
https://www.sau.com.au/forums/topic/217150-what-size-tyres/#findComment-3836171
Share on other sites

what about 235/45/18 on the fronts and 255/35/18 on the rears? Or would that be too weird a setup?

that would give me a 1.3cm larger diameter at the rears 1.5% in speed difference (rears faster) and 0.5cm difference in sidewall height (fronts higher)

Why do you want to put a smaller tyre on the front, do you want it to understeer?

Over 60% of the weight is on the front tyres.

Cheers

Gary

Link to comment
https://www.sau.com.au/forums/topic/217150-what-size-tyres/#findComment-3836190
Share on other sites

Why do you want to put a smaller tyre on the front, do you want it to understeer?

Over 60% of the weight is on the front tyres.

Cheers

Gary

Sorry I've fixed that typo. it's the fronts that would have a 1cm larger diameter with that sort of setup ... is that any better or still stupid? Should I just go 235/40 front and rear?

Link to comment
https://www.sau.com.au/forums/topic/217150-what-size-tyres/#findComment-3836201
Share on other sites

K I've decided to try the Maxxis Z1's due to price being only $179 per corner and me not being able to find ONE negative review for them plus they seem to have won some Wheel's price/performance test.

Now just to get the size right !!

Link to comment
https://www.sau.com.au/forums/topic/217150-what-size-tyres/#findComment-3836342
Share on other sites

you mean you're going 235 at the front and 265 at the rear or are you really putting wider tyres at the front? Speaking of which, why is it so common to see people put wider tyres at the back when the rim width is the same ??

Yeah my bad, was typing up a quick response while i was 'working' and didn't check it before posting

Bigger tyres on the back is an effort for more traction i'd say, yeah it might/probably will understeer but who really races their skylines on a street setup?...well their daily driven skylines anyway.

Link to comment
https://www.sau.com.au/forums/topic/217150-what-size-tyres/#findComment-3836431
Share on other sites

I'll speak to the BJ guy tommorow and see what he reckons... I'd "like" 235/40/18 at the front and 255/35/18 ar the rear - but that means the fronts will be 1cm bigger (ie. sidewall 0.5cm higher). I'm not sure if that's a bad thing - I'll see what he reckons and go from there. Thanks all.

Edit: or maybe instead of the above setup, I'll go 245/40/18 all around. That'll give me a higher side wall (better ride comfort??), it's only 1.9cm extra diameter and 3% slower than speedo says (driving 97kmh when it says 100kmh)

Edited by Delta Force
Link to comment
https://www.sau.com.au/forums/topic/217150-what-size-tyres/#findComment-3836446
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
    • The roof is wrapped
    • This is how I last did this when I had a master cylinder fail and introduce air. Bleed before first stage, go oh shit through first stage, bleed at end of first stage, go oh shit through second stage, bleed at end of second stage, go oh shit through third stage, bleed at end of third stage, go oh shit through fourth stage, bleed at lunch, go oh shit through fifth stage, bleed at end of fifth stage, go oh shit through sixth stage....you get the idea. It did come good in the end. My Topdon scan tool can bleed the HY51 and V37, but it doesn't have a consult connector and I don't have an R34 to check that on. I think finding a tool in an Australian workshop other than Nissan that can bleed an R34 will be like rocking horse poo. No way will a generic ODB tool do it.
    • Hmm. Perhaps not the same engineers. The OE Nissan engineers did not forsee a future with spacers pushing the tie rod force application further away from the steering arm and creating that torque. The failures are happening since the advent of those things, and some 30 years after they designed the uprights. So latent casting deficiencies, 30+ yrs of wear and tear, + unexpected usage could quite easily = unforeseen failure. Meanwhile, the engineers who are designing the billet CNC or fabricated uprights are also designing, for the same parts makers, the correction tie rod ends. And they are designing and building these with motorsport (or, at the very least, the meth addled antics of drifters) in mind. So I would hope (in fact, I would expect) that their design work included the offset of that steering force. Doesn't mean that it is not totally valid to ask the question of them, before committing $$.
×
×
  • Create New...