Jump to content
SAU Community

Recommended Posts

Its @ Racepace. no go :geek:

:bomb_ie: no fun i wan see the 26 in the 31

put me down as a maybe please :P as long as i can meet someone somewhere (just look out for an excel haha)

done why do you wana meet some where??

I'll be there supporting both the A Team and B Team! >_<

So put you down

I'll be there, possibly head down to shep saturday.

If we can get a few people to chip in for petty then we'll all go in ryans car....not that he knows yet.

No worries champ. the 180 will be cramped with more than 2 though.

if you all chip in enough i will enter and you can have the couch to follow me around with a trailer.

No worries champ. the 180 will be cramped with more than 2 though.

if you all chip in enough i will enter and you can have the couch to follow me around with a trailer.

My chips don't have that many zeros... We could go in my SS although the cel would be heaps better. I've never been in one.

I won't be making it to sandown to watch the morning session but will be at the BOMBARDIER CAR PARK event in the arvo. Does anyone know where this is? like address that I can look up?

EDIT: just found it on the events schedule.

im in narre and wouldnt mind goin down there wif people as i dont really know many people there. ne one wanna meet up at krispy kremes at fountain gate? and if so wat time as it starts at 9am at sandown

if i knew i could of given u a lift

well i dont think you would of wanted to drive down to the gul & then all the way back the other way but thanks anyways

dont think i would of been able to last the whole day, not feelin 100% after last night lol

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...