Jump to content
SAU Community

Recommended Posts

Due to popular demand, i have organised another Ten Pin Bowling Night for Saturday the 24th of May. I know it's still a few weeks away, but i had to get in early and book the lanes.

Once again it is unlimited bowling for 3 hours. It's a disco night and they also hold games and have small prizes. The place has a licensed bar for those over 18's, who won't be driving on the night. There are also bumpers for those who may be worried about gutter balls...

When: Saturday 24th May

Time: Meet at 8.30pm, Bowling is from 9pm - Midnight

Where: Logan Ten Pin, 17 Wembley Road, Logan Central

Cost: $17 per person - which includes shoe hire and unlimited games of bowling for the 3 hours.

Link to the site:

http://www.logantenpin.com.au/logan/partie...yNightFever.htm

I have currently only booked two lanes. Can everyone who plans on attending post up in here (+ any friends and family who are coming), so i can book extra lanes, if required and available.

Last time we met up for dinner beforehand. If people are keen, i'm sure we can arrange something again. Of course, as usual, everyone is welcome!!!

Hope to see you all there!!!

Edited by Miss Niz
Link to comment
https://www.sau.com.au/forums/topic/217381-ten-pin-bowling-night/
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

How cool, I'll come! I'll be by myself, hubby can watch the munchkins :P

I dont suppose closer to the date it might be possible to get a lane number or something because I kinda dont know who anyone is, or who to look for LOL

Be nice to meet you guys! :P

Awesome! The list so far:

1. Teena

2. Nadeem (Teena's +1)

3. Vish

4. Vish's +1

5. Adam

5. Manda

6. Michael

7. Michael's +1

Snoop74 - we will be meeting out the front at 8.30pm so just look out for the skylines. I'll either be bringing my 34 or Nadeem might bring his VT SS... See what happens closer to the date. If i can get lane numbers earlier that day i will!

Edited by Miss Niz
w00t! :):huh::(

I guess that means you're in Will??? Unless you've got another date with the wall??? :D

we need a Group hug foto this time !!

For sure!!! We keep saying we're going to have one, but the only we've had was down the coast - human pyramid!!! lol

Awesome! For some reason i can't edit my list above...

8. Will

9. Paul (HR31_RB25DET)

10. Richard (Teena's +2)

11. Merita (Teena's +3)

12. Glenn

13. Glenn's +1

14. Mick

15. Kerrianne

I'll have to ring up and book another lane or two this week...

i wonder if the cars hug we might get alot of dents and scratches hehe ..

Nice number of people attending should be good

Sus- T could you add another person my cousin will come along , my Plus one her name is Ania :laugh:

Thank you

P.S hope Nadeem got a nice big b/day pressie !!

Edited by 53XYN
i wonder if the cars hug we might get alot of dents and scratches hehe ..

Nice number of people attending should be good

Sus- T could you add another person my cousin will come along , my Plus one her name is Ania :w00t:

Thank you

P.S hope Nadeem got a nice big b/day pressie !!

Awesome! Well i still can't edit my other posts for some crap reason.. so the list continues... lol

16. Vish's Cousin

Haha yeah he got spoilt. we might even bring his big new toy out for this... btw i'm talking about his new car :merli: Or he might get to drive my 34 again (if he behaves himself) so i can have a drink or two.

:dry:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
×
×
  • Create New...