Jump to content
SAU Community

Nulon oil  

24 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Hi everyone.

I recently fell for the propaganda from Nulon. I bought Nulon 10w-40, since then been having problems. Engine revving strangely. Feels like it's not as free revving at high revs etc. I used Shell 5w-40 before and had no problems.

Has anyone tried Nulon, or had problems with it? Feedback would be appreciated. I'm trying to eliminate things to get to the bottom of the problem.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/217719-nulon-oil/
Share on other sites

best to stick to the good brands ive found :nyaanyaa: but yet again your problems may not exactly be oil associated, VAC leaks, spark fuel can also cause these dramas, but as stated above if your unsure drain it replace filter and oil with quality brand and see if it helps

Good luck

Link to comment
https://www.sau.com.au/forums/topic/217719-nulon-oil/#findComment-3842293
Share on other sites

probably pointless to the question your asking about nulon but i used castrol in my car once. each time i started it cold could hear tappets clicking (meaning all oil is drained out of head and not leaving a film on anything). changed it again 2 weeks later to an $80 for 4 litres motul and havent looked back since. i figure oil is like blood in your body so for the extra $50 or so when your doing a service its well and truely worth it. On the other hand some people say oil is oil but thats just my 2 cents worth!

brett

Link to comment
https://www.sau.com.au/forums/topic/217719-nulon-oil/#findComment-3842626
Share on other sites

i know audi use castrol or motul if you have the R or S series , ive got shell in the Audi and motul in the skyline havent had any problem with them

every car has different clearences .. mightbe worth it changing oil n filters

P.s use oil flush t o completely get rid of old oil from the motor helps it keep it sludge free

Link to comment
https://www.sau.com.au/forums/topic/217719-nulon-oil/#findComment-3842876
Share on other sites

probably pointless to the question your asking about nulon but i used castrol in my car once. each time i started it cold could hear tappets clicking (meaning all oil is drained out of head and not leaving a film on anything). changed it again 2 weeks later to an $80 for 4 litres motul and havent looked back since. i figure oil is like blood in your body so for the extra $50 or so when your doing a service its well and truely worth it. On the other hand some people say oil is oil but thats just my 2 cents worth!

brett

Yes, i have the same with the Nulon. Tappets clicking on start up. Highly irritating, just another bad experience i guess. Maybe i should stop being so cheap and buy good oil. I have used Nulon additives a few times and had no problems.

Link to comment
https://www.sau.com.au/forums/topic/217719-nulon-oil/#findComment-3843309
Share on other sites

i have alot of different oils in the 4 years ive had my 33 ( shell motul nulon royal purple redline VP racing oils and more) full synthetics are the way to go. you will also find that the older the engine the heavier wheight oil you need to use eg older 15w50 newer 5w30 or 10w40 winter you can use a slightly thinner oil it holds its consistancy in colder climate in summer the oil thins out as it gets hotter it will not protect the engine as much if you are using 5w30 or 10w40 in older engine.

the best thing to do is use an oil flush and put in a better oil.

i found that the best oils for me where royal purple, redline, VP racing and motul is borderline for me.

my 2 cents worth

cheers marcus

Link to comment
https://www.sau.com.au/forums/topic/217719-nulon-oil/#findComment-3847530
Share on other sites

+1 for motul turobolight I used it in my NA/34 it felt much better then when the service center was putting in mobil. Its not even that expensive I think i payed like $65-$75 for like 5 liters at autobarn in browns plains. I used both 5w-40 and 10w-40 both seem to be fine id recommend motul. Never gave me a single problem and I used it for about a year and a half.

Link to comment
https://www.sau.com.au/forums/topic/217719-nulon-oil/#findComment-3848464
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to !
    • As I've said elsewhere, I am using the stock intercooler piping path in the engine bay, and a return flow cooler, and making ~250 rwkW (without any effort put into trying to turn it up past there just yet) and expect to be able to make some more, and frankly, I would be perfectly happy with 260-270rwKW. This is peak road Skyline usability territory. You go past there and, sure, the car will snap necks more when it's on boost, but it will also break shit all the time, cost a (even larger) fortune in tyres, etc etc. Anyway, I also do not like the over-the-fan pipe path, and you don't have to do it.
    • I see, honestly I’m not too fussed about the looks. The only reason to go plenum is to make the piping easier instead of the classic over the rad etc. 
    • Not easy to quantify wrt something like how many fractions of a second slower it would be over 0-100. But given that a 250-300rwkW car is able to do that launch sprint in 5-6 sec (and faster with appropriate tyres, and surface)..... giving up as much as a second would feel like torture. A ~450HP capable turbo is not going to make lots of boost in the 2000-3000 rpm range. So, whilst with some boost on hand it will be faster accelerating in that rev range than your engine currently is NA, it will not feel like a fast car until the boost is solidly in. You know what your car feels like right now when you open it up at 2000rpm. if you've ever been in an actual fast car, you will appreciate that the NARB25 is.... not exciting. Well, add some boost and it will be better. But shorten the intake runners and it might not be better at all. It might come out better, but it could end up feeling the same. For me, it's not the 0-X km/h sprints that matter. It is easy to fry the tyres with anything over 200 rwkW. You can't use all the power available in 1st and 2nd anyway, you have to modulate the throttle. What matters is how the car reacts when you're driving in traffic in 4th or 5th and have maybe 2000 rpm on board, and you want/need to add some speed quickly, and don't have time for the downshift. It won't make boost, it will be all NA (at the speeds we're talking about - remember how fast you're going at 2000 in 4th! and don't plan on breaking the limit by too much.) So giving away NA torque is not what I would consider practical for a street car. And retaining that NA torque builds boost faster which makes the car faster. The flashy plenum is not actually better, unless you're looking at a track car where you can keep it on the boil all the time.  
    • So how much difference does it make you think? Like 1 second in the 0-100?  I was have smaller turbo so hopefully that spools quick GTX2871.  currently it’s NA so you can imagine pretty slow, but I do want fast accusation a little as there’s not many places I’ll be driving where I go over 80 even near me. So 0-60 and 0-80 targets   
×
×
  • Create New...