Jump to content
SAU Community

Recommended Posts

well

sounds stupid i know, BUT its true (in my case)

Normally i average 200-250Km a tank

well, after i put this new to4e turbo on....i got 280KM to a half of a tank...

ao thats over 500KM to a tank if i calculate it correctly

ill do a test since i have to fill it up anwyays and i will have a week before i get a tune.

more on that later

yeah, im curious to see gas mileage between rough tune and after Rom tune with more fuel delivery parts installed.

im hoping 450+ KM a tank...if i can get 300 id be happy

this 250km a tank is killing me

its huge

i had to grind part of the compressor housing to fit it on the stock manifold (stainless had a huge ass crack so i threw it away)

its a t04E size compressor

50 trim

i get 10psi at 4k rpm

im imagining 1 bar at 4300-4500rpm

when i get home i will throw up a picture of it next to a stock turbo for comparrison

well sounds stupid i know, BUT its true (in my case)

Normally i average 200-250Km a tank

well, after i put this new to4e turbo on....i got 280KM to a half of a tank...

ao thats over 500KM to a tank if i calculate it correctly

ill do a test since i have to fill it up anwyays and i will have a week before i get a tune.

more on that later

What did you do, run it on 2 cylinders only? :)

Whats that knocking noise I hear? :(

lol

nah

AFs are in the low 13s accross the board

i had liek 2 horus to tune it on the highway.

and nah, i drive my car like a bat out of hell.

thats why i have to maintain it all the damn time.

im never out of boost normally

yeah, im curious to see gas mileage between rough tune and after Rom tune with more fuel delivery parts installed.

im hoping 450+ KM a tank...if i can get 300 id be happy

this 250km a tank is killing me

Should have gone Autech Grant. 650hp, 400kms a tank.

well that makes no sense to me .. hopefully someone will tell is what the go is

same here, thats why i was like WTF

so far 67 kms of hard city driving and it is still at hte full mark.

Yep, big turbo would be to blaim, when you're cruising along on the highway or whatever it is making less boost and the ECU runs is leaner.

It was the same for me with my old R31 that a HT-18 on it. Most the time was off boost, so fuel efficiency was awesome. As soon as you get up, you can just about watch the fuel needle dropping! A friend of mine with an R32 also has similar affects.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...