Jump to content
SAU Community

Recommended Posts

Hi Guys, Ive got basicly a stock R34 GTT.

The wife has said I can spend a few $$ on it :D :D

I want to warm it up a bit.

Budget is somewhere between $3000 and $5000.

Cant be too loud or Droney afterwards, its a car for daily use.

Whats the recommendations for the best bang for the buck?

I was thinking along the lines of

Pod Filter

Bleed Valve

Exhaust

Intercooler

Is that a reasonable start?

Any recommendations on brands / things to avoid?

Whats the Turbosmart E Boost like? Someone recommended one to me. Better getting this than a mechanical bleed valve?

Any ideas what increase in performance I would be looking at?

Lastly, wheres a place that does a good job at a reasonable price?

I bought it from Unique Autosports and Im quite happy to go back there. Anyone have good or bad experiences from them?

thats a start,

1st things i done

hks pod filter

bleed valve- boost up to 12psi

3'' exhaust,3''high flow cat, 3.5'' cat back

yet to get cooler but its in the process of being made.

saving up for apexi avcr- elec. boost controller

performance gain would be noticible with a good dyno tune,

UAS is where i get alot of my parts from and find them very good.

with just pod,zorst, and boost up i hit 146kw@wheels..

hope that helps..

cheers...

www.freewebs.com/2BNVS_r33

get a full exhaust and dont buy a bleed valve get an electric one instead. you can get fairly cheap second hand items such as the profec b. if your not looking for big hp you dont need the front mount intercooler. air filters also dont do that much. spend the rest of the money on some good suspension and a power fc. :(

I dynoed my car with a K&N panel filter and got 176kw@6007rpm with 1304Nm @4713rpm.

I fitted a 2 3/4 in stainless cat back exhaust and had the cat removed(because we can in NZ:p ) and then redynoed it and got 195kw@6660rpm and 1398Nm @4655rpm

This was on a dynapack pro V5 hub dynamometer.

All figures are at the wheel hubs.

You seem to on the right track, apart from the bleed valve. Forget about that and get an electronic boost controller. But a SAFC might be a good idea as well, to keep it from leaning out at higher boost.

Glenn

Originally posted by gts4-skyline

I dynoed my car with a K&N panel filter and got 176kw@6007rpm with  1304Nm @4713rpm.  

I fitted a 2 3/4 in stainless cat back exhaust and had the cat removed(because we can in NZ:p ) and then redynoed it and got 195kw@6660rpm and 1398Nm @4655rpm  

19kw just from removing the cat?

I didnt think they were that restrictive.

Im assuming that was the factory one you removed?

I removed the cat and fitted a 2 3/4in kakimoto stainless cat back exhaust. That gained me 19rwkw.

A SAFC is a super air flow controller, it enables you to controll the air/fuel mixtures by tricking the computer some how. I'm not really up to play with them, but have heard a few success stories from people fitting them.

Glenn

i'd go:

full aftermarket exhaust (one with centre muffler aswell as rear, since you dont want it too loud)

front mount intercooler

electronic boost control + apexi safcII, or can go for a more serious aftermarket ecu. try get these ones installed at the same time so you don't have to tune it more than once (save $).

Turbosmart E Boost is probably good, but you can also get jap brand EBC (electronic boost controllers) for a similar price. its up to you really.

instead of getting the safcII why not spend a little more for a greddy E manage. You can even find second hand power fc's for a little more than a thousand that will save you from spending money on the safc now when you will probably uprgrade to a a programmable computer in the future anyway.

GTS4 - are your kw readings to the wheels or to the fly wheel?

Check out this months issue of "Speed" the magazine. It has a RB25DET tune guide. It's worth a little look. Also got info on the V35 GT-R as well. Personaly I am adding a R34 FMC, Apexi Power FC with hand controler, air pod and exhaust to mine. Should go well I reckon. You'll get plenty of power before you even think on engine internals :P Just remeber they love to breath and the standard ECU's are full of holes.

the R34 intercooler is plenty big enough for the stock turbo.

It's thicker than the R33 cooler. If any of you R34 guys want to palm off your old stock intercooler let me know and I'll ping you $150 for it.

Get a light flywheel (and clutch while your at it).

Do the exhaust, all the way. Thermal wrap the dump & front pipe.

Diff cradle kit

Panel filter.

Boost controller.

For starters.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...