Jump to content
SAU Community

Recommended Posts

Hey,

any one out ther etried the Falken FK451's ?

in particular on standard R33 GTSt rims?

they seem like a really good tyre, but I was told that the Falken tyres are alot better in the larger/wider tyre sizes... can any one confirm/deny this?

I was looking at just replacing th estock the stock tyres on the stock rims, but not too sure... any other suggestions?

Also, just to confirm... R33 GTSt stockies are 16*6's y/n?

I've been told 16*6's and 16*6.5's... and I'm too lazy to take the wheel off :D

Thanks

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/
Share on other sites

I saw these 2 threads... and other stuff from other forums and on the net... just a bit worried about putting them on the stock rims though.

Ah well, I'll give them a whirl and see how they go, got about 1 mm on the back and 2mm of tread on the front... have to bite the bullet and find something soon!

Thanks,

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-462774
Share on other sites

they are alright for performance, only noisey and have bad ride quaility.

they are all the same as they made with same compound, size won't affect the quaility.

The only reason most ppls with big rims having them, is because they are the cheapest performance tyre which have LARGE range of size.

most of the brand only sell their TOP of the range performance tyre in low profile 17/18 or even 19. but falken have all of them even with the lowest range

stock rim should be 6"5, fit 225/50/16

but i heard some one fit a 245/45/16, not sure though.

hope that help

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-463264
Share on other sites

Well Fk451 are not too bad but have you ever thought about the ST115s? These are basically street Azenis rubber that have a soft compound but are great at giving you feedback and stick really good too. There not that much more then the FK451 but are heaps better when it comes to handeling and they have very little tyre noise too. Hope that helps mate.

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-469892
Share on other sites

Really good JimX. Wet or Dry, i have found these tyres extremly good. Even in the wet they have the same amount of feedback as in the dry. Heaps better then the FK451. Only down side is that they might wear abit qiuk due to it being a softer compound but that's the price you pay for having good tyres.

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-472153
Share on other sites

I'm used to having soft tyres. I need to replace the rear on my motorcycle every 6000km or so @$300 a pop. I think I'll try the ST115's, especially since they were cheaper than the FK451's (unless the shop guy got the prices wrong when I rang).

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-472346
Share on other sites

Is $280 per tyre for ST115 in 255/40/17 a good price? That's what I got quoted from my local Falken tyre shop. The ZE326's and FK451's were both $320 each. Is there anyplace in Sydney that can do better than $280 for the ST115's?

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-472516
Share on other sites

I think I stuffed up, I think I confused the prices I got for the ZE326 and ST115 around the wrong way. Which would mean this place sells the ST115's for $310. In that case, where can I get the ST115's for $280 in Sydney?

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-473312
Share on other sites

For anyone that's interested, I found out why ST115's have low road noise. According to Falken's American site, the ST115's have "Base tread rubber compound contains micro vacuum capsules that literally suck up road noise". I'm assuming that this also means less rubber hence they wear out quicker.

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-483291
Share on other sites

Going off reports on both I don't think they are worth the price difference. But this is only a rough judgement call based on other people's opinions, there's no way to tell unless you've test-driven both yourself. If I had lots of spare money I'd buy the best tyres I could but I can't so I'm going for the ST115's or FK451's (probably the former).

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-492475
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...