Jump to content
SAU Community

Falken FK451's ?

phorj
 Share

Recommended Posts

phorj Community Regular

phorj

Posted
Posted

Hey,

any one out ther etried the Falken FK451's ?

in particular on standard R33 GTSt rims?

they seem like a really good tyre, but I was told that the Falken tyres are alot better in the larger/wider tyre sizes... can any one confirm/deny this?

I was looking at just replacing th estock the stock tyres on the stock rims, but not too sure... any other suggestions?

Also, just to confirm... R33 GTSt stockies are 16*6's y/n?

I've been told 16*6's and 16*6.5's... and I'm too lazy to take the wheel off :D

Thanks

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/
Share on other sites
phorj Community Regular

phorj

Posted
  • Author
Posted

I saw these 2 threads... and other stuff from other forums and on the net... just a bit worried about putting them on the stock rims though.

Ah well, I'll give them a whirl and see how they go, got about 1 mm on the back and 2mm of tread on the front... have to bite the bullet and find something soon!

Thanks,

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-462774
Share on other sites
Maxx Veteran

Maxx

Posted
Posted

they are alright for performance, only noisey and have bad ride quaility.

they are all the same as they made with same compound, size won't affect the quaility.

The only reason most ppls with big rims having them, is because they are the cheapest performance tyre which have LARGE range of size.

most of the brand only sell their TOP of the range performance tyre in low profile 17/18 or even 19. but falken have all of them even with the lowest range

stock rim should be 6"5, fit 225/50/16

but i heard some one fit a 245/45/16, not sure though.

hope that help

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-463264
Share on other sites
honey Enthusiast

honey

Posted
Posted

Well Fk451 are not too bad but have you ever thought about the ST115s? These are basically street Azenis rubber that have a soft compound but are great at giving you feedback and stick really good too. There not that much more then the FK451 but are heaps better when it comes to handeling and they have very little tyre noise too. Hope that helps mate.

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-469892
Share on other sites
honey Enthusiast

honey

Posted
Posted

Really good JimX. Wet or Dry, i have found these tyres extremly good. Even in the wet they have the same amount of feedback as in the dry. Heaps better then the FK451. Only down side is that they might wear abit qiuk due to it being a softer compound but that's the price you pay for having good tyres.

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-472153
Share on other sites
JimX Grand Master

JimX

Posted
Posted

I'm used to having soft tyres. I need to replace the rear on my motorcycle every 6000km or so @$300 a pop. I think I'll try the ST115's, especially since they were cheaper than the FK451's (unless the shop guy got the prices wrong when I rang).

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-472346
Share on other sites
JimX Grand Master

JimX

Posted
Posted

Is $280 per tyre for ST115 in 255/40/17 a good price? That's what I got quoted from my local Falken tyre shop. The ZE326's and FK451's were both $320 each. Is there anyplace in Sydney that can do better than $280 for the ST115's?

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-472516
Share on other sites
JimX Grand Master

JimX

Posted
Posted

I think I stuffed up, I think I confused the prices I got for the ZE326 and ST115 around the wrong way. Which would mean this place sells the ST115's for $310. In that case, where can I get the ST115's for $280 in Sydney?

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-473312
Share on other sites
JimX Grand Master

JimX

Posted
Posted

For anyone that's interested, I found out why ST115's have low road noise. According to Falken's American site, the ST115's have "Base tread rubber compound contains micro vacuum capsules that literally suck up road noise". I'm assuming that this also means less rubber hence they wear out quicker.

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-483291
Share on other sites
JimX Grand Master

JimX

Posted
Posted

Going off reports on both I don't think they are worth the price difference. But this is only a rough judgement call based on other people's opinions, there's no way to tell unless you've test-driven both yourself. If I had lots of spare money I'd buy the best tyres I could but I can't so I'm going for the ST115's or FK451's (probably the former).

Link to comment
https://www.sau.com.au/forums/topic/21792-falken-fk451s/#findComment-492475
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      You Gregged a whole racetrack!?
    • GTSBoy
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By GTSBoy · Posted

      Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Bireley_32
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By Bireley_32 · Posted

      Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...