Jump to content
SAU Community

Recommended Posts

Hi everyone,

Im new on here, my bf sinistagtst has been on here for ages but is away atm so im following his advice and coming to you guys for a little help.

I wont go into detail as im still pretty pissed off atm but long story short Im in need as a RWC asap on my skyline

As you can see from my sig its not standard and I know this is gunna cause problems getting a Road worthy

So......

Im after a mechanic preferably in the mitchelton area of brisbane to do a road worthy on the beast thats going to be a little lienient on it

If any one can help that would b much apperciated

Im feeling like a silly little girl atm with the whole deal

Cheers

Edited by miss_sinista
Link to comment
https://www.sau.com.au/forums/topic/217934-can-any-one-help/
Share on other sites

Do you need a RWC, or are you looking to clear a defect?

Assuming you're just after a RWC, to be honest you shouldn't have a huge issue with your car. Wind up your suspension if it's below the 100mm requirement, make sure your lights all work, pod is secured (that's sometimes enough) or in a sealed box, tyres are legal, steering wheel isn't stuffed, your gear knob has a H pattern on it, brakes work properly, it's not insanely loud etc and it should pass easily. The only issue you might have is with noise as the HKS Super Dragger isn't exactly silent. An exhaust shop should be able to put in a resonator or something for fairly cheap if you're worried about it, speak to Rob Bliss if you're northside, he's very reputable and knows his stuff.

Don't feel silly btw, you'll find most people on here are pretty understanding :dry:

hi there Bianca, well i ha a RWC done on my car after my engine was rebuilt just to see if there is any problems etc.. mines decently modded as well this fella from JD automotive (john) is fairly good doesnt pik on mods as lonng as its not leakin oil , pads are ok , pods secured , its not too low as Marc said now the charge is 120 bucks it would be more i something needsa fix i havent got his number on hand but if u look up his business name im sure u can find him in the yellow pages

P.S explain it to him why you want a RWC if its clearing a defect be clear :dry: good luck

Edited by 53XYN

thanks for your help guys!

no it hasnt been defected, basically i bought it last wk under the impression it had a rwc already.

Sill me didnt actually read it properly and it has expired so i now have to get anotherone to change it into my name......

i was also told it had 6 months rego on it and again i didnt actually read it and it is about to run out

if i had known both of these things daniel would have been able to get them sorted for me before he left but now hes away for 6 months so Im left too feel like a silly little girl and try organise it myself

Oh and to make matters worse im not from Brissy so i dont know where to start which is why this is just getting me really worked up....

grrrrr

see silly emotional female lol

Awwwwww dont feel silly!

I would also try and contact the original place that did the RWC. It might make things a little easier for you.

I bought mine from a dealer and they took care of putting it my name etc, but a friend had to do all this for her last car also so I know how annoying it is finding out the certificate has expired.

Hope it all goes smoothly!

and to make matter worse, on my way home a garbage truck ran into the front end of the skyline, no phyisical damage so i let him go but i have since taken it for a drive and i think it needs a wheel alignment....

i cant begin to explain the day i have had....

ps can any one help with putting a thermostat back in the car as well.... another long story

Well I didnt get details....i had a blonde moment

But i have contacted the council and they have contacted the garbage company

so i should here from them soon

Because there were bent bits..... $250 later.......

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...