Jump to content
SAU Community

Recommended Posts

Injection perfection (bankstown airport) seem to have a good rep. They quoted me $33 an injector, being cleaned in a bath, and then thru 1 of the pulsing machines. $33 seems abit steep?

Another place at lidcombe (search thru posts abotu cleaning) said $22 an injector.

Let me know how it goes. Im looking to do the same, though just waiting til i decide if im going to clean these, or replace with higher feed unit.

Thats like $190....???? I hope that includes flow testing and new o-rings etc. Ill try them on Monday.

Its strange the things that stick in your mind, i thought $8 (aprox) for ultrasonic cleaning was close to the mark, so maybe $33 is for flow testing and new o-rings etc?

I had mine done by Jamie Waterhouse (4721 7227) at peach tree... he did my whole 100,000km service (I supplyed the timing belt though) and I think it cost about $600 all up. Have the recipts somewhere but he has always met (or been VERY close to) his quotes and has also done a good job.

He once had my car for two days (Friday Arvo, Saturday and Sunday morning) looking for a problem with a miss... he eventually didn't find anything after spending most of the weekend on it (he usually only does half Saturday) and when he gave it back he said... I could not find the problem... (Pressure tested and flow tested and all sorts of things... even had the fuel pump out) when asked how much I owed him for his time he said "nothing... he didn't fix a thing."

I noticed that I got a much more smooth power delivery and it felt to me like I got a power gain. I had the injectors removed when they were cleaned.

I have also heard good reports about Nepean EFI and they are just off Batt street I think?

Yeah , I see your point Ben.

Flow and pattern testing , as I understand it means: Pressurize each injector, activate it, measure the flow (in cc's) and pattern (like does it dribble or is a nice spray) [yeak OK that is not a very technical explanation]

Cleaning is seperate -

No point cleaning a stuffed injector !

It included new O-rings and Plastic tips (whatever they are called) and were ultrasonically cleaned, and flow tested as well as checking the spray pattern.

Let me check the receipt when i get home for the name, i only know it as the blue building near the gym

As for differences in driving, ill never know, they are GTR injectors going into my Rb20, along with a new turbo and ECU. So was more a peace of mind thing for the new setup

Roy,

Did you get the results for each test on each injector - like on paper ?? Or did they just say 'yeah they are ok'

If the former, can you let me know where you got them done ??

I need to test 6 Hi Flow pieces of shit injectors - prolly they are still stock which would explain my smallish engine issue.... Anyway that's another story....

Thanks mate,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...