Jump to content
SAU Community

Recommended Posts

Hi guys, ive just purchased a 1997 RS Four Stagea from Japan and it has a HKS boost guage mounted ontop of the steering column which im not to keen on. Ive seen the Greddy A-Pillar replacement guage pods which hold 3 guages and did a search on the net and found that the R34 model should bolt straight inplace of the orignal Stagea A-Pillar cover. Can anyone confirm if it is true? and it will suit my year model of Stagea?

Link to comment
https://www.sau.com.au/forums/topic/218790-greddy-a-pillar-replacement/
Share on other sites

I'm with Tangles on this one - the Mearcat gauge pods are great!

You've gotta be careful of the A-pillar pod mounts, some cops will still defect you for them, which will be a PITA to sort out and clear.

search in this section for "Mearcat"

he makes custome guage pods for the stagea

looks very good

Yeah, ive had a look at them but not to keen on the style and would like to mount severl guages down the a-pillar.

honest question, how old are you?

haha... i thought the same thing but let it go.

I think a-pillar guages are more of a nuisance than anything. they block your vsion, attract cops, and arent really in the most useful place. Excellent wank factor, but 'several guages up the a pillar' in an auto stagea... unnecessary....? If you need some meters to monitor your engines comings and goins, a mearcat setup or din-pocket triple guage setup is a good idea.

if, however, youre mad keen on the a-pillar guages, try yahoo auctios i guess. the a pillar of a stagea and a R34 'line are different angles im pretty sure, just from looking at them.

bobbeh

I dont see what my age has to do with anything :( , but for the record im 20. I dont want the a-pillar guage holder because its "Hetik" or "Sick" i just want something that looks resonably good and looks factory. As i stated the merkat guage holder arn't really my style that fact the it has huge white writing on it and doesn't match the interior colour. From my point of view it stands out more then having gray a-pillar pod's. Also i have serveral mates with the a-pillar pod holders in there car's and have had no trouble from police and doesnt really obstruct there view while driving (if anything looking at guages in your dash is more distracting). A simple no the greddy one will not fit was the answer i was really after.

i know the spec-r s15 silvias came out with a boost guage mounted in a pod on the a-pillar. could hunt down one of those. Tell the cops it is a factory option and is a genuine nissan part if they give you hassles.

we sell twin guage a pillar pods at my work, but i dont have any triples. they are a universal, trim to suit kind of thing. i could have a look at it and see what it would involve to get it sitting nicely in my S1 if you like, and if you like i could make it work using my car and then send it off to you.

the reason i ask, is anyone with any long term (well longer) knows that an A pilliar gauge setup is horrible

The main reason is because your focus of vision from the road to the a pilliar is SO great that it is often distracting to look at it. Whereas if you mount them on the dash, its in your plain field of sight, and easier for your eyes to adjust quickly since they are further as well.

Yeah it looks ugly, but i have a spaceship on my dash becuase its easier to monitor everything, a pilliar pods are cool, but very unfunctional if you plan on being seriously competing in anything be it daily driving or drag racing or drifting. its just an odd, flashy spot to put things. as close to the distance of your gauge cluster is the best (not literally in, but you could if you want)

I dont see what my age has to do with anything :P , but for the record im 20. I dont want the a-pillar guage holder because its "Hetik" or "Sick" i just want something that looks resonably good and looks factory. As i stated the merkat guage holder arn't really my style that fact the it has huge white writing on it and doesn't match the interior colour. From my point of view it stands out more then having gray a-pillar pod's. Also i have serveral mates with the a-pillar pod holders in there car's and have had no trouble from police and doesnt really obstruct there view while driving (if anything looking at guages in your dash is more distracting). A simple no the greddy one will not fit was the answer i was really after.

No, your age has nothing to do with it, that's true.

What Grant is pointing out is pretty true, though - it would take your eyes longer to focus on gauges that are a lot closer to you, and then re-focus on the road ahead of you than if they were in line or near your standard instruments. Plus, the a-pillar is pretty thick as it is already - an unfortunate side-effect of almost all new cars having to have stronger roll-over protection for its driver and occupants.

The Mearcat gauge pods are good quality, they DO come pretty close to the factory dash colour (nobody realises mine's not a factory part), and the "Mearcat" logo is pretty small and hardly noticable unless you REALLY look from outside.

I think if you still want to go with it, then Bobby's offer is probably the best bet. I don't recall ever seeing a factory or aftermarket gauge pod for the Stagea, and finding one from another car to suit could take a long time, Nissan or not...

  • 4 weeks later...
The Mearcat gauge pods are good quality, they DO come pretty close to the factory dash colour (nobody realises mine's not a factory part), and the "Mearcat" logo is pretty small and hardly noticable unless you REALLY look from outside.

Cheers for the compliment on the pods :thumbsup: FYI - I have recently decided that NONE of the Mearcat gauge pods will now come with the Mearcat logo stenciled on them and they will only be painted a close matching grey to the dash. Although advertising via a logo is always nice to have, I'd rather have them not stand out and achieve their goal as something more factory looking than the a-pillar mounts; as well as trying to keep within the same vision depth as the speedo etc.

  • 1 month later...
I dont see what my age has to do with anything :D , but for the record im 20. I dont want the a-pillar guage holder because its "Hetik" or "Sick" i just want something that looks resonably good and looks factory. As i stated the merkat guage holder arn't really my style that fact the it has huge white writing on it and doesn't match the interior colour. From my point of view it stands out more then having gray a-pillar pod's. Also i have serveral mates with the a-pillar pod holders in there car's and have had no trouble from police and doesnt really obstruct there view while driving (if anything looking at guages in your dash is more distracting). A simple no the greddy one will not fit was the answer i was really after.

im with you man .. i have s2 full option ... and gauges on the dash really muck up the look im lucky to get one with nothing done to it at all, but im opting for the a-pillar so all the wire's can run behind the pod and dash and no drilling involved in the dash. if u find anything about it msg me .. getting head aches looking for them cheers!

post-16976-1217241275_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...