Jump to content
SAU Community

Dam Epa

Gazzilla

By Gazzilla,
in Victoria

 Share

Recommended Posts

dmr Mentor

dmr

Posted
Posted
Guys, that's not how the dB system works.

it's not a linear measure, an increase of 3dB represents a doubling of sound energy - eg 2x100dB cars doesn't equal 200dB, they'll make 103dB.

so geraus, 87.9 is a comfortable pass.

thanks for the clarification.

Just use this change to get a proper quiet/flowing exhaust made

spending money on a "fix" IMO is dead money.

Sell the exhaust you have, put that (and the "fix" money) towards the new quiet one and never have a problem again.

No swapping etc. Time is money both literally and laterally in fuel cost and time off work, swapping etc.

Over the course of 2-3-4-5-6 EPA's you'll soon see that doing it when you should have was cheaper.

I used to do the whole swap the exhaust thing. End of the day its a pain in the arse after a while :)

i agree; but is there a manufactured exhaust out there on the market (say, mid and rear mufflers only) which has great flow and very little restriction that stays under the 90dB limit? shoving a heap of mufflers in an exhaust will only kill performance.

Link to comment
https://www.sau.com.au/forums/topic/219028-dam-epa/page/2/#findComment-3869217
Share on other sites
Gazzilla Experienced

Gazzilla

Posted
  • Author
Posted

How much am i looking at to get a 3.5" made with 2 mufflers? or how much did u pay?.. The Lads at Nisswreck say they can fix me up with a Stock ECU and airbox. (thnx for offer R34NRG). so that is sorted. So its just the Plumback i gotta get. might buy Dezz's one, if still for sale.

thnx again blokes.

Link to comment
https://www.sau.com.au/forums/topic/219028-dam-epa/page/2/#findComment-3874044
Share on other sites
RB32 Collaborator

RB32

Posted
Posted

Hey guys

Sorry to hijack but i will be going for a full test in the next week or so.

I have changed everything to standard form except for my dr Drift remap ECU and r33 turbo.

Will they pick up on this or make me change these two mods?

Cheers Adrian...

Link to comment
https://www.sau.com.au/forums/topic/219028-dam-epa/page/2/#findComment-3878506
Share on other sites
KezR33 Veteran

KezR33

Posted
Posted

Get this;

http://www.lancershop.com/customer/product...t=27&page=1

and this;

http://xforce.com.au.tmp.anchor.net.au/cars/view_car/29

I can vouch for the muffler, the car sounds quieter than my girlfriend's Corolla when the valve is closed.

Link to comment
https://www.sau.com.au/forums/topic/219028-dam-epa/page/2/#findComment-3878578
Share on other sites
WYTSKY Veteran

WYTSKY

Posted
Posted

Hey gazzilla... just a thought... if you did want to keep your pfc ecu in there (without the commander) why not just unscrew the front of it if you can? and replace with a standard plate... I have a spare r33 ecu lying around and if you want to borrow the front plate feel free... they wouldn't know serial numbers/etc would they?

Link to comment
https://www.sau.com.au/forums/topic/219028-dam-epa/page/2/#findComment-3879258
Share on other sites
GriMo Contributor

GriMo

Posted
Posted
Get this;

http://www.lancershop.com/customer/product...t=27&page=1

and this;

http://xforce.com.au.tmp.anchor.net.au/cars/view_car/29

I can vouch for the muffler, the car sounds quieter than my girlfriend's Corolla when the valve is closed.

Other then the fact both of those are illegal i cant see any reason not to fit them...

Link to comment
https://www.sau.com.au/forums/topic/219028-dam-epa/page/2/#findComment-3879446
Share on other sites
  • 2 weeks later...
mr_r33gtst Rising Star

mr_r33gtst

Posted
Posted
hey i just got my EPA about 2motnsh ago! i had a pod filter, turbo back 3inch exhaust greddy catback with a greddy 3'inch dump pipe and a 3inch high flow... I took off my PE II Extreme and chucked on my OEM catback to the greddy trust dump pipe and JUst passed! 87.9 . So if i was u dude, chuck back on the catback!

When i had to present my r33 to EPA, i put back the standard catback, but left my high flow cat, aftermarket dump and front pipe on, and it made 86db. So u have no cahnce

Link to comment
https://www.sau.com.au/forums/topic/219028-dam-epa/page/2/#findComment-3911584
Share on other sites
ghostflameR33 Enthusiast

ghostflameR33

Posted
Posted

quite a few of us here got done lol.. when igot done i had microtech ltx12s 550c inj ,3 1/2 turbo back exaust. ext w/gate. high mount gt35r turbo etc. put it all back to stock. the guy at mcleods sits ur car on the spot revvs it up and down and while doin this plugs in his own type of data logger into a lume in ur car which is located underneath the dash under the steering column which gives out readings so they can tell if its facory they go by factory specs give or take 5 % up or down etc. but theyre not all that bad just doing there job...

When i had to present my r33 to EPA, i put back the standard catback, but left my high flow cat, aftermarket dump and front pipe on, and it made 86db. So u have no cahnce
Link to comment
https://www.sau.com.au/forums/topic/219028-dam-epa/page/2/#findComment-3915599
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • The Bogan
      SAU NSW - R U OK? Southern Highlands Cruise

      By The Bogan · Posted

      Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...