Jump to content
SAU Community

Recommended Posts

hey

just bought myself a 32gts. the problem im having is that my highbeams are stuck on when i turn the lights on. i have no low beams. i cant use the indicator stick to turn them off. at the moment i have to use my parkers and fog lights as my low beams. i tried to test the relay in the engine bay fusebox and only 5 of the 6 connectors (dont know the technical term) had power going to them.

any help would be much appreciated

Link to comment
https://www.sau.com.au/forums/topic/219067-headlight-problems/
Share on other sites

In R32s there is a little relay box ( Thats what I think its called ) somewhere in the steering column area.this is connected to the headlight switch itself. Quite often the contacts start bending from years of use ...I would be looking at this first..Go to an auto electrician, they will fix that problem quite easily

make sure you tell them about the "light control module" in the steering column, or just under the dash, otherwise they spend hours looking...

Happened to me only a month or so ago in my 33

  • 2 weeks later...

Hi All,

I'm also having headlight problems, 1 on and 1 off etc.. Could someone describe in more depth where this relay box in the steering wheel can be found or even post a picture as I have been hunting for weeks on what could be causing me all the headaches :unsure:

If anyone has a pic it'd be greatly appreciated!

Cheers,

Adrian

  skysaresilver said:
Hi All,

I'm also having headlight problems, 1 on and 1 off etc.. Could someone describe in more depth where this relay box in the steering wheel can be found or even post a picture as I have been hunting for weeks on what could be causing me all the headaches :(

If anyone has a pic it'd be greatly appreciated!

Cheers,

Adrian

is your issue the same as the initial post?

if not, describe it in more detail.

  skysaresilver said:
Hi All,

I'm also having headlight problems, 1 on and 1 off etc.. Could someone describe in more depth where this relay box in the steering wheel can be found or even post a picture as I have been hunting for weeks on what could be causing me all the headaches :D

If anyone has a pic it'd be greatly appreciated!

Cheers,

Adrian

1-on-1-off is usually the switch. Been covered a squillion times.

  blind_elk said:
1-on-1-off is usually the switch. Been covered a squillion times.

Yep, I would have initially jumped to this conclusion also but when I imported the car 2-3 years ago I changed out the headlight switch then for a new one from Nissan. Cost me an arm and leg at the time for this pissy little switch ($300+ from memory).

Fixed the problem at the time but has now come back to haunt me.. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...