Jump to content
SAU Community

Recommended Posts

If I were to import a car that was on the list of *RAWS/SEVS? compliable imports, however choose not too do it straight away, what is the time frame I have to get it done by?

What happens when that window of time runs out? And do I even have to go ahead with compliance if I choose to keep the car for off road use only?

thanks

*what ever the new system is called.

Edited by Nismo_Boy

This is only the case for normal compliance cars which are imported and not presented for compliance within 12 months ... vehicles imported as the initial test car and other special exemptions apply as long as DOTARS are aware of the situation. Most workshop will ask for the car to be moved directly to them from the ports anyway, but if you make arrangements for the car to be moved elsewhere first then you should let the workshop know as they could get annoyed if they have a plate set aside for you and have your approval cancelled otherwise.

Personally I would suggest only importing a car once you have the funds to get it complied because you can't do anything with it anyway, and car prices are always dropping so if you can't afford compliance for another 6 months then you might get a cheaper car at the time.

Thanks Craig,

Was more of a hypothetical situation to just bring an eligible car over (an never end up complying it) and just use it for off road use, as I only hold a level 2 CAMS license, not a Circuit Racing/Level 3 CAMS license.

But if the consequences after the 12month window is crushed/exported it’s not worth the effort.

Thanks.

why not just comply it but never register it? it's not like compliance costs a huge amount of money. plus then when you want to sell it you will have a car that is actually saleable and worth something as opposed to an unregisterable car. there is no law that says you must register it once it's complied. and then down the track whoever wants to register it just needs a blue slip and away they go.

why not just comply it but never register it? it's not like compliance costs a huge amount of money. plus then when you want to sell it you will have a car that is actually saleable and worth something as opposed to an unregisterable car. there is no law that says you must register it once it's complied. and then down the track whoever wants to register it just needs a blue slip and away they go.

The sheer cost in removing items and replacing them, plus compliance cost then converting it all back to its modified state isn’t financially feasible (in my mind).

Now knowing, there is a 12 month window, it’s just cheaper for me to look locally for something close to what I want and adapting it to suit my needs. Or apply for my Circuit Racing license and just do the required number of events I believe is stipulated from CAMS

This is only the case for normal compliance cars which are imported and not presented for compliance within 12 months ... vehicles imported as the initial test car and other special exemptions apply as long as DOTARS are aware of the situation. Most workshop will ask for the car to be moved directly to them from the ports anyway, but if you make arrangements for the car to be moved elsewhere first then you should let the workshop know as they could get annoyed if they have a plate set aside for you and have your approval cancelled otherwise.

Personally I would suggest only importing a car once you have the funds to get it complied because you can't do anything with it anyway, and car prices are always dropping so if you can't afford compliance for another 6 months then you might get a cheaper car at the time.

Good point, and agree totally on the last part. I've heard of test cars go past the 12 month mark, sometimes DoTaRS chase it up, sometimes they don't - if there's a legit reason for the delay then they let it slide. I don't think "using it as a race car" would probably fall into the legit reason category.

Thanks Craig,

Was more of a hypothetical situation to just bring an eligible car over (an never end up complying it) and just use it for off road use, as I only hold a level 2 CAMS license, not a Circuit Racing/Level 3 CAMS license.

But if the consequences after the 12month window is crushed/exported it’s not worth the effort.

Thanks.

Don't be totally put off by the level of your CAMS licence. In the case of drifting, DoTaRS will be more interested in your racing background, what car you're buying and what competitions you plan to enter with it. Because the national comp only requires level 2 licences, I've brought a couple in through race/rally with level 2 licences, but both were experienced competitors at a state level wanting to move up into Super Drift or Drift Australia.

Don't be totally put off by the level of your CAMS licence. In the case of drifting, DoTaRS will be more interested in your racing background, what car you're buying and what competitions you plan to enter with it. Because the national comp only requires level 2 licences, I've brought a couple in through race/rally with level 2 licences, but both were experienced competitors at a state level wanting to move up into Super Drift or Drift Australia.

Errrr.. actually I would not want to give anyone the impression that you will get a race/rally (or drift) import approval without a level 3 (national level) CAMS licence ... other than what you are saying I personally can't recall hearing of anyone ever getting approval with only a level 2 licence even for drifting. On the other hand I have heard of dozens who were rejected specifically because they don't have a level 3 licence regardless of other details provided.

By my understanding DOTARS want to know that you are active in motorsport and dedicated, going to the time, effort and expense of getting a level 3 licence shows this but everyone knows that you can get a level 2 licence and enter a couple of drift events to get basic motorsport evidence within a month or two and for a cost of less than $200 ... I doubt DOTARS would approve a race import on this basis unless you had a massive amount of drift experience and could show that you were actively drifting in a national series, etc.

Race imports are supposed to be for large national level events, not club events or occasional use, so you would have to prove well that it's more that just a hobby. Anyone that has any doubts should call DOTARS on 1800 815 272 to be shot down before getting excited at the possibility of being able to import a modified car for drifting.

On the issue of importing a modified car under the SEVS compliance laws for using for race only, you just can't do it without being hassled by DOTARS down the track, so I would strongly suggest against trying it. One idea would be to import a heavily modified car and strip off all the parts, then crush the body and hand back the tags to the compliance workshop - they may still want payment from you as it will use one of their approvals for nothing, but you can discuss the option with some workshops and see what they say.

Otherwise have the car stripped in Japan and shipped as parts. This requires major stripping and shipping the body in a seperate container to the rest of the car, so will cost thousands more than normal import plus the time and effort needed to try and put it back together in Australia.

Probably the best option is to just find someone with a level 3 licence and the necessary motorsport history who hasn't imported a race car within the past 12 months and ask them to get import approval for you - there are literally 1000's of guys out there in other motorsport categories who have no intention of ever importing a car for race use, so you can most likely get someone to help out for a small fee which although bending the rules still keeps it legal and easy.

I only said it was possible, not that it was easy :happy: Both competitors had a fairly extensive competition history, backed up by letters from series organisers and magazine articles etc.

I've seen examples of all the other options you've listed too. The nasty side is that wreckers have apparently been bringing in cars that are nowhere near compliable, then claiming the wreck back off the unsuspecting RAWs who waste a plate on it when they reject it...

Interestingly enough, a couple of businesses (who do used parts, coincidentally) are claiming to have been given approval by DoTaRS to bring in race/rally vehicles without any paperwork at all, in order to sell, so I'd be very curious to know what the approval is...

Edited by vrfour

Thanks for the advice guys, I don’t drift. I’m involved with hill climbs, sprints and motorkhana’s. Obviously club level, but I’ve been doing it on and off for years and was involved with establishing a local hill climb here.

So on merits alone, don’t think I’d scrap in without the correct CAMS license for race only import.

Thanks for your help

In your case I would suggest just asking around at the events you attend, there is likely to be people there who have the correct level licence and might be happy to help you out for a few hundred dollars for themselves which is still less than the deposit you would have to pay a compliance workshop to even get import approval that way.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the reply mate. Well I really hope its a hose then not engine out job
    • But.... the reason I want to run a 60 weight is so at 125C it has the same viscosity as a 40 weight at 100C. That's the whole reason. If the viscosity changes that much to drop oil pressure from 73psi to 36psi then that's another reason I should be running an oil that mimics the 40 weight at 100C. I have datalogs from the dyno with the oil pressure hitting 73psi at full throttle/high RPM. At the dyno the oil temp was around 100-105C. The pump has a 70psi internal relief spring. It will never go/can't go above 70psi. The GM recommendation of 6psi per 1000rpm is well under that... The oil sensor for logging in LS's is at the valley plate at the back of  the block/rear of where the heads are near the firewall. It's also where the knock sensors are which are notable for 'false knock'. I'm hoping I just didn't have enough oil up top causing some chatter instead of rods being sad (big hopium/copium I know) LS's definitely heat up the oil more than RB's do, the stock vettes for example will hit 300F(150C) in a lap or two and happily track for years and years. This is the same oil cooler that I had when I was in RB land, being the Setrab 25 row oil cooler HEL thing. I did think about putting a fan in there to pull air out more, though I don't know if that will actually help in huge load situations with lots of speed. I think when I had the auto cooler. The leak is where the block runs to the oil cooler lines, the OEM/Dash oil pressure sender is connected at that junction and is what broke. I'm actually quite curious to see how much oil in total capacity is actually left in the engine. As it currently stands I'm waiting on that bush to adapt the sender to it. The sump is still full (?) of oil and the lines and accusump have been drained, but the filter and block are off. I suspect there's maybe less than 1/2 the total capacity there should be in there. I have noticed in the past that topping up oil has improved oil pressure, as reported by the dash sensor. This is all extremely sketchy hence wanting to get it sorted out lol.
    • I neglected to respond to this previously. Get it up to 100 psi, and then you'll be OK.
    • I agree with everything else, except (and I'm rethinking this as it wasn't setup how my brain first though) if the sensor is at the end of a hose which is how it has been recommended to isolate it from vibrations, then if that line had a small hole in, I could foresee potentially (not a fluid dynamic specialist) the ability for it to see a lower pressure at the sensor. But thinking through, said sensor was in the actual block, HOWEVER it was also the sensor itself that broke, so oil pressure may not have been fully reaching the sensor still. So I'm still in my same theory.   However, I 100% would be saying COOL THE OIL DOWN if it's at 125c. That would be an epic concern of mine.   Im now thinking as you did Brad that the knock detection is likely due to the bearings giving a bit more noise as pressure dropped away. Kinkstah, drop your oil, and get a sample of it (as you're draining it) and send it off for analysis.
    • I myself AM TOTALLY UNPREPARED TO BELIEVE that the load is higher on the track than on the dyno. If it is not happening on the dyno, I cannot see it happening on the track. The difference you are seeing is because it is hot on the track, and I am pretty sure your tuner is not belting the crap out of it on teh dyno when it starts to get hot. The only way that being hot on the track can lead to real ping, that I can think of, is if you are getting more oil (from mist in the inlet tract, or going up past the oil control rings) reducing the effective octane rating of the fuel and causing ping that way. Yeah, nah. Look at this graph which I will helpfully show you zoomed back in. As an engineer, I look at the difference in viscocity at (in your case, 125°C) and say "they're all the same number". Even though those lines are not completely collapsed down onto each other, the oil grades you are talking about (40, 50 and 60) are teh top three lines (150, 220 and 320) and as far as I am concerned, there is not enough difference between them at that temperature to be meaningful. The viscosity of 60 at 125°C is teh same as 40 at 100°C. You should not operate it under high load at high temperature. That is purely because the only way they can achieve their emissions numbers is with thin-arse oil in it, so they have to tell you to put thin oil in it for the street. They know that no-one can drive the car & engine hard enough on the street to reach the operating regime that demands the actual correct oil that the engine needs on the track. And so they tell you to put that oil in for the track. Find a way to get more air into it, or, more likely, out of it. Or add a water spray for when it's hot. Or something.   As to the leak --- a small leak that cannot cause near catastrophic volume loss in a few seconds cannot cause a low pressure condition in the engine. If the leak is large enough to drop oil pressure, then you will only get one or two shots at it before the sump is drained.
×
×
  • Create New...