Jump to content
SAU Community

Recommended Posts

last weekend, "on a private road area" i decided to see how well these skylines do circle work, i found out, they do it quite easily.

i even started it in 2nd gear, surpised me how fast it whipped around actually.

any way the point of this post, it open wheeled for about 3 metres on the 2nd donut,

the diff seems healthy, but i wouldnt mind making it a bit tighter,

should i just go to nissan and buy some shims to tighten it up?

or is there something else i have to/should do?

cheers people.

Link to comment
https://www.sau.com.au/forums/topic/219530-loose-diff/
Share on other sites

The beginning of the end.

Its a viscous diff not a great deal can be done apart from shim it which sort of works but with mine it would still single leg in a straight line; out of corners etc it would twin nicely.

If you are going to have the car making some decent power spend 1k and throw a good new mechanical in it.

Link to comment
https://www.sau.com.au/forums/topic/219530-loose-diff/#findComment-3872615
Share on other sites

The beginning of the end.

Its a viscous diff not a great deal can be done apart from shim it which sort of works but with mine it would still single leg in a straight line; out of corners etc it would twin nicely.

If you are going to have the car making some decent power spend 1k and throw a good new mechanical in it.

a grand on a new diff?? im not going to be a pro drifter mate. lol

i dont really wanna lock it, its too dangerouse....

i might just shim it tight, and see how i go, if it does do commodore style single leggers when i launch, i will definately start looking at a brand new item, prob go a mechanical two way, make it more interesting. and do it right the first time i suppsose.

Link to comment
https://www.sau.com.au/forums/topic/219530-loose-diff/#findComment-3872619
Share on other sites

a grand on a new diff?? im not going to be a pro drifter mate. lol

i dont really wanna lock it, its too dangerouse....

i might just shim it tight, and see how i go, if it does do commodore style single leggers when i launch, i will definately start looking at a brand new item, prob go a mechanical two way, make it more interesting. and do it right the first time i suppsose.

Nothing about being a pro drifter its just what a new diff is worth. And there's no other option apart from dodgy shimming which induces understeer and in my opinion made the car feel shit. Especially pushing in to round abouts.

Mine was tight enough to always chirp the inside wheel through corners but on hard acceleration it would still single leg.

Spend more $$ on tyres and i guess you don't have to worry about it single legging as much :)

I wouldn't go a 2 way. 1.5way for street etc.

Link to comment
https://www.sau.com.au/forums/topic/219530-loose-diff/#findComment-3872626
Share on other sites

Nothing about being a pro drifter its just what a new diff is worth. And there's no other option apart from dodgy shimming which induces understeer and in my opinion made the car feel shit. Especially pushing in to round abouts.

Mine was tight enough to always chirp the inside wheel through corners but on hard acceleration it would still single leg.

Spend more $$ on tyres and i guess you don't have to worry about it single legging as much :)

I wouldn't go a 2 way. 1.5way for street etc.

spend more money on tyres? geez, i paid 260 ea for my 18s, and i thought that was dear!

i think i will just look into a new diff, i want it to be streetable, i have driven a car with a mini-spool, and your right, it does feel like poo.

ill finish this one off first though.

come on race track! hurry up and open!!!!!!

Link to comment
https://www.sau.com.au/forums/topic/219530-loose-diff/#findComment-3872647
Share on other sites

:) $260ea for your 18's eh? Try over $450ea for my car :(

Seriously though, I'd definately go for the new diff option too, like Cubes said shimming the diff does make the car feel rather pooey, especially in round-abouts; that's just my experience however. You don't need it at the moment, so I'd just put $100 or so away every pay and before too long, bam, new diff :D

Link to comment
https://www.sau.com.au/forums/topic/219530-loose-diff/#findComment-3872662
Share on other sites

:) $260ea for your 18's eh? Try over $450ea for my car :(

Seriously though, I'd definately go for the new diff option too, like Cubes said shimming the diff does make the car feel rather pooey, especially in round-abouts; that's just my experience however. You don't need it at the moment, so I'd just put $100 or so away every pay and before too long, bam, new diff :D

450??? fark! youd be scared to chirp them? every chirpie would cost you bout 15 bucks! lol

ha ha im already saving for a new turbo and fuel pump....

ill need to start selling myself on hindly street soon lol

point taken though, cheers guys

Link to comment
https://www.sau.com.au/forums/topic/219530-loose-diff/#findComment-3872664
Share on other sites

i wouldnt call it a disease, but more of an addiction lol,

i wasnt going to spend a penny on it when i first got her a month or so ago......hmmmm 3 grand later, i still have more to go.

im sure everyone else on here is the same too, but hey, atleast we all have something to be proud of.

Edited by craig R33
Link to comment
https://www.sau.com.au/forums/topic/219530-loose-diff/#findComment-3872677
Share on other sites

If ya down south, go poke ya head in and speak to Graham at Boss Differentials (Listed as Boss Automotive in the phonebook - Scarbourough Way Lonsdale)

He does all kinds of diff centres and diff work, and can suss it out and tell you how much ya looking at. He's also a seller for KAAZ mechanical diffs.

Service is second to none, and he's always willing to offer straight down the line advice. He has built many an old schooler diff, race cars, maintains god knows how many drifter's 31 diffs hahahaha, and tons of street cars

He'll be able to give ya an idea of the best diff centre for ya application and not let ya spend heaps of $$$ on something ya might not need

Link to comment
https://www.sau.com.au/forums/topic/219530-loose-diff/#findComment-3873166
Share on other sites

I had a small bad experience with boss.. :blink:

I think he was in a rush and simply shimmed my s/h purchsed lsd.. preload was tight but there was a couple of smashed disks in there that he didn't notice. So wasted a bit of money with both the purchase and shimming of the s/h diff. :blink:

Link to comment
https://www.sau.com.au/forums/topic/219530-loose-diff/#findComment-3873192
Share on other sites

i wouldnt call it a disease, but more of an addiction lol,

i wasnt going to spend a penny on it when i first got her a month or so ago......hmmmm 3 grand later, i still have more to go.

im sure everyone else on here is the same too, but hey, atleast we all have something to be proud of.

yea champ, they cost alot of cash but i figure, money is money, it comes and goes whatever you spend it on, if its something you love and get enjoyment out of then its all worth it.

Link to comment
https://www.sau.com.au/forums/topic/219530-loose-diff/#findComment-3873968
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
    • The hydrocarbon component of E10 can be shittier, and is in fact, shittier, than that used in normal 91RON fuel. That's because the octane boost provided by the ethanol allows them to use stuff that doesn't make the grade without the help. The 1c/L saving typically available on E10 is going to be massively overridden by the increased consumption caused by the ethanol and the crappier HC (ie the HCs will be less dense, meaning that there will definitely be less energy per unit volume than for more dense HCs). That is one of the reasons why P98 will return better fuel consumption than 91 does, even with the ignition timing completely fixed. There is more energy per unit volume because the HCs used in 98 are higher density than in the lawnmower fuel.
    • No, I'd suggest that that is the checklist for pneumatic/hydraulic adjustable systems. I would say, based on my years of reading and complying with Australian Standards and similar regulations, that the narrow interpretation of Clause 3.2 b would be the preferred/expected/intended one, by the author, and those using the standard. Wishful thinking need not apply.
×
×
  • Create New...