Jump to content
SAU Community

Recommended Posts

yea trust me its not fun hitting poles in ur 32!!

let me kno wat i need and i will see if i got any of it, and help u out

do u still have ur old 32? there may be a few bits that i am interested in in that case. i'll be in touch mate.... i think i saw u put ur msn addy on here, i'll add ya

spot of drifting ey :)

common bent items are LCA, Castor rods and Upper control arm.

if you hit it real hard, then the list is as mentioned above

cool, im hoping the strut was not affected

my money is on lower control arms, caster rods (possibly) and caster rod bracket (weak as piss as they are designed to crumple easily with the crumple zone due). upper control arms can take a big f**king beating, so i doubt they would be bent on such a relatively small impact. Also look at your engine crossmember, if the force is large enough it will bend where the LCA mounts on the crossmember. i would also be surprised if your strut was damaged as the strut is mounted to the UCA which as i mentioned before are tough as fark and rarely bend.

well i went off to Pedders today for my $14 suspension saftey check :) here is the list of things that they reccomend i replace:

* lower control arm

* stub axle

* knuckle (wtf is a knuckle??)

* castor arms

* ball joints

* tie rod ends

* control arm bushes

* rack mount bushes

* wheel bearings

their quote was for $1336 (inc. labor) and they wanted me to source the LCA stub axle and what ever a f**king knuckle is. im not gonna pay that to get my car back on the road...

could i please get reccomendations on where i can source the LCA, stub n knuckle, and a good place to buy the relevant bushes?

cheers in advance guys!

they must mean the steering arm knuckle which is a cast part of the hub arrangement.

yeah that'd make sense. so i'll try z-imports to see if they have anything i need,

can anyone suggest any other places to get my LCA, stub & steering knuckle?

i reckon id get a 2nd opinion,

by the sounds of things, most of that stuff is stuff thats general wear, not from the crash, stuff they probably generically quote to replace on old cars. with the knuckle, i gotta say, i dont exactly see how that would break, especially break without having serious damage to the steering, and as far as i can see they have only mentioned tie rod ends.

but yeh, grab a lower control arm with balljoint in it, chuck it in and take it to another place, take it to a reputable place with deals with imports, uve gotta understand pedders are used to idiots dropping their cars off and picking their car up and paying whatever it costs as they have nfi, so pedders are used to replacing stuff that doesnt really need to be urgently replaced. saying that, control arm bushes, bearings and tie rod ends do go after a while and should be replaced, but im just saying that it may not be urgent stuff and i dont think its necessarily from the crash, my suspension has taken a direct hit to a small wall (about 10" high) at 50k's, the whole side of the car went up in the air and almost rolled, disintegrated my wheel, and my bearings, stub axle, steering knuckle etc were all fine.

oh, btw, pretty sure this is what they mean by the knuckle (bottom right):

DSCN7680-1.jpg

so yeh, cant exactly imagine that breaking under the force of the steering rack, but u never know i guess.

  • 2 weeks later...

well i have a fresh LCA in my car now :) stoked as!!!

i ended up getting help from Kane (who owns eyecandy) top bloke, he came to my place with his mate craig and they swapped the bent bits over in my shed for a fkn unbeleveable price :D im a very happy customer... once I get the phone line fault fixed at my place, and get my intarwebz back i will post pics of the LCA that i gave a durability test :D

i just gotta get a wheel alignment, and im back in the game baby!!!!

i hghly reccomend Kane to help those that either cbf (like me) or arent heaps familiar with fixing cars

what parts did they end up changing over?

only the LCA was bent, so that was all we replaced, attempted wheel alignment confirmed that the side that was fixed is cool.... but it looks like there is something sinister going on in the drivers side now. guys at brighton tyre power reccomend i take it to action suspension, n get them to suss it out... lets hope the chassis aint twisted.

im thinking of getting all adjustable castor n camber arms, and then getting someone to set it up nice

only the LCA was bent, so that was all we replaced, attempted wheel alignment confirmed that the side that was fixed is cool.... but it looks like there is something sinister going on in the drivers side now. guys at brighton tyre power reccomend i take it to action suspension, n get them to suss it out... lets hope the chassis aint twisted.

im thinking of getting all adjustable castor n camber arms, and then getting someone to set it up nice

i havnt heard a bad thing about action, never actually been there but AFAIK they are decent.

well i have a fresh LCA in my car now :) stoked as!!!

i ended up getting help from Kane (who owns eyecandy) top bloke, he came to my place with his mate craig and they swapped the bent bits over in my shed for a fkn unbeleveable price :) im a very happy customer... once I get the phone line fault fixed at my place, and get my intarwebz back i will post pics of the LCA that i gave a durability test :D

i just gotta get a wheel alignment, and im back in the game baby!!!!

i hghly reccomend Kane to help those that either cbf (like me) or arent heaps familiar with fixing cars

Cheers buddy any time we always have a heap of r32/r33 parts either to loan for a defect or to get ya skyline back on the road

we also stock a lot of bodykits

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...