Jump to content
SAU Community

What Does Offset Mean

Skyline_Lover
 Share

Recommended Posts

Skyline_Lover Contributor

Skyline_Lover

Posted
Posted

What does offset mean???im just now gettin into the whole sars thing :D but im 15 and live in japan and am loving my skyline anyways enough about me lol also what width should i look for???? I have an R34 1998 2.5 GT i know i need 5x114.3 but thats all i know what else do i need 2 look for?

Link to comment
Share on other sites
Yawn Mentor

Yawn

Posted
Posted

Offset is how far the hub of the wheel is from the centre of the wheel. So basically the lower the offset, the more dish you will get. Or more spoke concavity depending on the style of the rim. But this also means that the wheel in general will sit further out the lower you go with offset.

In general lower offset = tough, but more effort involved in getting the wheel to sit right if you go too low (guard mods, camber, stretched tyres).

For your car id go something like 18x8.5 front and 18x9.5 rear. With maybe 35-ish offset for something reasonable.

Link to comment
Share on other sites
Skyline_Lover Contributor

Skyline_Lover

Posted
  • Author
Posted

will these rims work fo my car? i am conserned about the 45mm offset in the rear but i'm not sure if it matters in the front bacause it does not rotate...will these work? thanx

Brand:Ruff RacingNumber of Bolts:5Material:Alloy Width:8.5J Front/9.5J RearBolt Pattern:5 x 114.3/5 x 120Structure:One Piece Diameter:18 inchesOffset:38 Front/45 RearPart Number (MPN):9308912B45

Link to comment
Share on other sites
NZMO Experienced

NZMO

Posted
Posted
For your car id go something like 18x8.5 front and 18x9.5 rear. With maybe 35-ish offset for something reasonable.

Yeah , i agree as mentioned above, this is the offset and rim size i am running on my GTT R34, have a look at my gallery pics to give you an idea.

cheers

David

Link to comment
Share on other sites
Nav2k Community Regular

Nav2k

Posted
Posted (edited)

most ppl want the wheel to completely fill their guards.

the more towards 0 (well...negative really) acompanied by width, the more it'll fill it out.

google for 'offset calculator' to see the difference new rims will make from ur old rims.

this is my car below with

18x10 +18 rear

18x9+20 front with a +25mm spacer...effectively making it 18x9 -5.

CIMG3374.jpg

ofcourse you'll need to roll ur guards and if u keep going flaring your guards.

so basically figure out what others r running on the 34's with a guard roll (only costs $50 a corner to do) and go for that is my suggestion.

Edited by Nav2k
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Lets play a game - What is causing my oil consumption?

      By Dose Pipe Sutututu · Posted

      I am going to chime in here and say that is very bad advice for a built motor, making decent power of 400kW+ Especially if the rings have been gapped on the looser side. The more power you make the heavier you need your oil to be to be able to maintain that suspension between the moving parts, if not you'll have journals and bearings making love and grenade a motor. Remember that all moving parts inside the motor aren't ball bearing and are journal bearings and require oil to separate the surfaces from contacting.
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Yeah I noticed this just now. No doubt she will be running smoother next start😂🤣😂
    • joshuaho96
      ENR34 - Leaking Transfer Case

      By joshuaho96 · Posted

      ENR34 manual transmission transfer cases are 33100-23U00 which is shared with all of the R32/R33 GT-Rs and GTS-4s. And the C34 Stagea. Do not bother with automatics, that is a huge effort to swap and the car will be worse for it. And an automatic transfer case does not have the right housing for the shifter which comes out the back of the transmission and goes through the transfer case. I already posted my response on reddit but if you didn't see it there here it is: You have almost certainly damaged the transfer case, the only question is how badly. Nobody can tell you how bad without more information. If you have a giant hole in the transfer case pissing out all the transfer case fluid then you need a new one. If it's not that bad then the only question is whether you burned up the clutches. Drain the transfer case oil and inspect for metal on the drain plug magnet. Small black filings are normal. Big chunks of metal or a ton of black fuzzies not so much. Fluid should be nice and red. Any other color isn't great. If the color is reasonably red and there's not a bunch of clutch material discoloring it or anything like that you probably got away with insubstantial excess wear not worth trying to fix. If you have to rebuild or replace the transfer case keep in mind you have to pull the transmission to get it off.
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      As promised………… the first start. Rough and a few bugs to work out. Still she lives att.1cnTUvrWxiOZUFbg0S43m1VFUdDhxGBq3UU53bvtkww.mp4
    • blind_elk
      Lets play a game - What is causing my oil consumption?

      By blind_elk · Posted

      Can I suggest a 15W50 oil is too heavy. Its a brand new engine - you should be able to run something like a 10W30. Shove some steel wool into your catch can  - more technically "oil/air separator" - so that the oil vapour has something to condense on.
×
×
  • Create New...