Jump to content
SAU Community

Recommended Posts

cost me $220 to tune my SAFC on a single turbo soarer! im sure a Powerfc would take longer but not much i wouldnt imagine, thats if everything is ready to rip and you dont have any other unforseen issues :thumbsup: Mine was done at Trojan!

Edited by slaughter

A good tune should *last* years. Assume u mean 'take' :w00t: Depends if your getting a fuel/timing controller, a boost controller, or the whole shebang (full ECU). A full ECU from scratch is like... 600-700? The others, maybe half that I guess.

You packing a bender, PFC or stand alone? EDIT: Faaark! I just found the car you purchased, "veeedy nice"

$1000 is steep for the first two, though it clearly depends where you take it to get tuned. I'm not sure iv heard of anyone in cbr that would warrant giving 1k to. Unigroup is well spoken about in Sydney.

How long? - PFC's don't have the same "self tweak" function as the OEM ECU does. They'll trim fuel by a decaying % to take into account wear like fuel pumps, lazy injectors etc.

That said a tune should last years i would have thought, assuming you don't move to the coast or something >_< A setup like yours, I would have thought, would be at dyno days, events and generally have a wideband up his ass often enough to know if at least if WOT figures are remaining solid.

Edited by GeeTR

Hahahah man i need to grow up. Seeing you, quote me, who quoted Borat maketh me chuckle... still.

Yah nah, i saw Goldie had 13 posts to his name... 2.7sec's later - SAU coughed up the R33 'for sale' thread. Check it, 6boost m.fold, t04z, 264's... :D

I kinda guessed something like this. In that case, we could have been more useful in answering his original question! Seems to me like it would be a pretty in-depth tune by a mechanic for a PFC running all that, but then wouldn't the car already be tuned? Is there a particular problem you want to get rid of with a new tune Goldie?

Hi Everybody.

First up - thanks for the info.

Question answered, a tune should last over a year then ? Only asking cause if i'm forking out that sort of moolah, I want to know how often, so knowing a tune is a wise investment as it last over year ..cool.

Yeah ruff quotes in Canberra where from $750 start to the $1,1k mark - and have no probs in going to syd to get it done also.

sl33py - Since picking up the car - I get the feelin the ride it's been tuned purely for top end speed, (I've never been in anything that goes from 90km/h to 170km/h in like 3 seconds)

it's running very rich and does not like stop starts and low idles, it hunts for revs after coming to a stop ....but I want to get it back to 0 to 100 tune (if that makes sense) I don't want top speed, I want 0 to 100, beat everyone off at traffic lights etc etc.

Cheers all.

sl33py - Since picking up the car - I get the feelin the ride it's been tuned purely for top end speed, (I've never been in anything that goes from 90km/h to 170km/h in like 3 seconds)

it's running very rich and does not like stop starts and low idles, it hunts for revs after coming to a stop ....but I want to get it back to 0 to 100 tune (if that makes sense) I don't want top speed, I want 0 to 100, beat everyone off at traffic lights etc etc.

Cheers all.

You might not be able to change much in regards to the engine characteristics. Big turbo + big cams + ported head + big plenum, usually = rough idle and big top end power so a bitch of a street car with a fair bit of lag in other words.

The problem there is that as the car has a large turbo on it. As hard as you try to make more low RPM torque the best your going to be able to do is probably add in a bit more ignition advance down low. Large turbo's on small engines (as opposed to say an LS1) just don't make much low RPM torque.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...