Jump to content
SAU Community

Recommended Posts

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

What if i get a R34 25GT N/A. If i give it some mods like podfilter, extractors and catback exhaust how much extra HP would i get ? And would an auto box handle this. Also a stage 2 shift kit for the auto box will that be wise ? since i dont like the smooth shifting in normal auto but since R34 has tiptronic mode you can change at whatever revs you like ? Or does it still do annoying things like switching gears when you dont want, although automatic downshifts are nice.

  • 2 weeks later...

Hmm sweet!

Australian Capital Territory

The ACT imposes no restrictions on the type of car that may be driven by a P plater -- P platers can even participate in an optional Road Ready provisional licence "P off" course that allows proven responsible drivers to remove P plates within six months of gaining a licence.

Guess ill be getting that GTT after all. :)

Btw how much extra fuel would the turbo car eat compared to N/A say if you are driving like a normal granny and not hitting too much revs / throttle.

turbo car when off boost uses less fuel then N/A. Scientific reason i can't be bothered typing when im already 5 minutes late for work :down:

Google it

Yeah i read that before but is it hard to not hit the boost especially if its auto ?

Why you getting a Auto? I guess manual 34's are hard to find and they always want more money.

Yeah by the looks of things and what ive heard the manuals are usually more expensive, more K's and usually been more thrashed. And nothing better than using the tiptronic and sticking a stage 2 shift kit for harder and faster shifts on it because i think the tiptronics dont instantly change gears they think before the right time comes and switch then which can be a few seconds. Manual would be nice though so im learning manual for my P's now so just in case the time to buy one comes if a nice manual is available i can go for it, but is it 1 year before they give you choice of removing the auto restriction from your p plates.

Yeah by the looks of things and what ive heard the manuals are usually more expensive, more K's and usually been more thrashed. And nothing better than using the tiptronic and sticking a stage 2 shift kit for harder and faster shifts on it because i think the tiptronics dont instantly change gears they think before the right time comes and switch then which can be a few seconds. Manual would be nice though so im learning manual for my P's now so just in case the time to buy one comes if a nice manual is available i can go for it, but is it 1 year before they give you choice of removing the auto restriction from your p plates.

AWW ok i didn't know you guys have a Auto restriction for your P plates, that's interesting and would really suck i love my manual auto's get so boring after a while, i get why though with some of the people around the Sunshine Coast can't wait to get to ACT going to be different and hopefully better and much colder! :(

dude throw that 18k into a managed fund....i got a n/a r34....i love it!! but im spending too much money on it for mods and all. oyu can say youll keep it stock ALL YOU WANT, but it wont happen haha. throw it into a managed trust fund or high interest savings account....id personally get some govt bonds....and watch your money ggggrrrrRRROWWW.

well..

n/a r34 now.....or r34 gt-r in a few years time?

take your pick.

yeah as hard as it is to say, shanil is right, i wish i had put my cash into shares or something first, now i have all these good contacts to invest with and no money to do it, even just put the cash away until you have your full liscence, hindsight is a wonderful thing, just remember at the end of the day it is your choice and im sure everyone will help either way you go.(yes i know thats not want you to hear, i was in the same position 6 months ago, lol)

zac trust me its colder all right, exspecially the drill practice from 7 to 8 this morning, the rain was a nice additive too, lol, why you moving sown mate

thanks alex,

share market is down in the red zone at the moment....that means two things....possibly it cant go down any further ... AND ... stocks and managed are great 'value' at the moment. I' throw my 18k into a bank account or some investment venture.

i've got an r34 n/a....as much as you mod it up, it doesnt present that thrill that a turbo does. you're looking at about 4-5k on top to get it to 140rwkw i rekn.

yeah as hard as it is to say, shanil is right, i wish i had put my cash into shares or something first, now i have all these good contacts to invest with and no money to do it, even just put the cash away until you have your full liscence, hindsight is a wonderful thing, just remember at the end of the day it is your choice and im sure everyone will help either way you go.(yes i know thats not want you to hear, i was in the same position 6 months ago, lol)

zac trust me its colder all right, exspecially the drill practice from 7 to 8 this morning, the rain was a nice additive too, lol, why you moving sown mate

Just got a job down there in Training, so i will be running traineeships and Management training ect.... Also working in Management for the first couple of months :( . Least the pay will be better! :thumbsup: more money to spend and save!

dude throw that 18k into a managed fund....i got a n/a r34....i love it!! but im spending too much money on it for mods and all. oyu can say youll keep it stock ALL YOU WANT, but it wont happen haha. throw it into a managed trust fund or high interest savings account....id personally get some govt bonds....and watch your money ggggrrrrRRROWWW.

well..

n/a r34 now.....or r34 gt-r in a few years time?

take your pick.

Yeah ill get a GTT. :D And dammit stop making me not get a skyline or ill be driving a starlet or a 3cylinder for 5 years. And if i did get the GTT the mods i would get would be 18-19" rims i wonder how much these cost ->

thats evo cams car i found in the photo section.

S004.jpg

and ofcourse some awesome soundsystem with a few speakers, subs, amp and thats probably the furthest ill go o and exhaust. :) Then maybe extractors, bigger front pipes hmm maybe podfilter and boost controller a ECU, pro tires etc.

But nah ill stop at the exhaust. :(

And currently my cash is in a high interest account and last month i got 38$ from interest for nothing, kinda good. If i have 18k in there it would be ~100$ a month from nothing, and if i keep working ill have 40k before i finnish uni then can move out :/. But if i get a car that will be like 5k at the end but would be worth it.

lol thats cool dude,

post up pics when you buy it...

yeah good wheels are expensive...

98 octane is 170 near my place now...so factor in 100 bucks+ a tank for refuelling.

You've got to decide what you want to do, but your going to pay through the nose with insurance, even if it's only third party. Be a shame to write off the car and get nothing.

Plus petrol as people have said, at one stage I was doing 20-25,000 odd k's are year in the skyline and it was costing me around 370$ a month in petrol. Would be over 400$ or so now if I was still driving it all the time(driving less now). So need to keep all that in mind.

just buy what ever you want and catch a bus its easier and cheaper and your precious line will be safe and sound all week until you let it out on the weekends :thumbsup:

I couldnt handle driving another auto ever again, not cool. N/A is even less cool :worship:

But do consider your future ie house etc before you buy :S

just buy what ever you want and catch a bus its easier and cheaper and your precious line will be safe and sound all week until you let it out on the weekends :)

I couldnt handle driving another auto ever again, not cool. N/A is even less cool :)

But do consider your future ie house etc before you buy :S

I catch a frickin bus and it smells. 1.5hours + to get home from work and thats only ~19km away but using just as a weekend car is good since i work on sat and sun and the buses is shit and gotta cut my hours down.

Auto's are nice though :D I heard just get a 2nd stage shift kit on the tiptronic r34 and its all good to go but a manual is harder to find.

I calculated that 3rd party + rego (the human damaging 3rd party) is like 600$ and 3rd party property damage is an extra 480$~ per year. Not too bad. Just 3 weeks of work.

Fuel is a bitch so if i drive ~40km a day 7 days a week (usually never peak hour) it will be like 280km a week and i hope to drive like a grandma apart from the occasional road rage that happens. :)

And would it be possible to get those rims in second hand cause they looks heap sweet.

Bye

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
×
×
  • Create New...