Jump to content
SAU Community

Recommended Posts

TRUST =

Was just gonna post that :rofl:

That was with a BatMBL split dump, 3" catco, and trust pe II. It sounds a little different under load than in my garage there. It's a pretty quiet exhaust until you give it some.

are u serious? u must be talkn about some diff type of kakimoto because the only ones on sale atm are the mega n1 and the Regu 06 & R. and both are 3.5" exhausts with a 6 or 7" tip. that thing is a monster.

Yeah that is what I was thinking... I mean the Regu could possibly be a bit quieter but the N1 full mega is a beast... But still compliant, which is what I'm looking for...

Was just gonna post that :rofl:

That was with a BatMBL split dump, 3" catco, and trust pe II. It sounds a little different under load than in my garage there. It's a pretty quiet exhaust until you give it some.

yeh i agree, trust are very quiet. have u ever tested it with a db metre?

I know this is an R33 GTR, but here is a sample of a Kakimoto zorst..

which kaki is the importent question. if itsa 6 year old exhaust theres not much point in lookn at it. just like the old HKS dragger systems

Edited by R34NRG

There are so many different opinions on all of the mentioned exhausts and its hard to tell from youtube vids because there are so many different variables that all the cars have that which change the exhaust note. I haven't shopped around too much yet, but from what I've seen not many of the exhausts have a kit available for 4 door 34's which limits my choices a bit. To summarize what has been discussed so far...

Trust PE2 - a little bit too quite for people's liking

HKS Silent - not too quiet, not a bad note when your pinning it

Kakimoto - N1 sounds like a monster with a 6" or 7" tip - so probably bit too loud for what I'm looking for

Blitz Nur -sounds pretty sweet, but i dont know if it comes with a 4 door kit

Apexi - does it come with a 4 door kit?

HKS HI-Power - ?? not sure any thoughts

yeh i agree, trust are very quiet. have u ever tested it with a db metre?

which kaki is the importent question. if itsa 6 year old exhaust theres not much point in lookn at it. just like the old HKS dragger systems

I haven't tested it with a spl metre.. but in comparison to my previous systems - Nismo, Apexi N1. It's louder than the nismo, but still far quieter than the Apexi N1 (i found the N1 a little too barky for my tastes, whereas the PE2 has a much deeper note to it).

are u serious? u must be talkn about some diff type of kakimoto because the only ones on sale atm are the mega n1 and the Regu 06 & R. and both are 3.5" exhausts with a 6 or 7" tip. that thing is a monster.

i still rkn HKS silent sounds like a girl......dosnt have that note i like.

the HKS Hi POwer is another story, very very nice exhaust BUT is in mild steel which we all know isnt that great compared to stainless.

Yeah well my other mate has the kakimoto exhaust with the titanium tip look one, and gosh its even quieter than the HKS silent one and really can only hear it if your right behind the car.

Yeah well my other mate has the kakimoto exhaust with the titanium tip look one, and gosh its even quieter than the HKS silent one and really can only hear it if your right behind the car.

that would be the Regu 06 & R.

gosh maybe im wrong....i always heared those things were monsters.....full turbo back system ur mates? 3.5 all the way?

I can vouch for the batmbl / Bos importing and Catco metal cat, they are great. I have them on my R34 GT-t 4 door.

I have some Nismo cat back system, but i cant comment on the sound it makes. When i was putting on the dump pipe i snapped a bolt in the turbo, and ever since all i can hear is this huge exhaust leak sound haha.

  • 2 weeks later...

Blitz Nur Spec V exhaust, not the spec R. In terms of performance it's one of the straightest systems out. And the note it makes is bloody amazing. I haven't heard another exhaust system on an rb make such a sweet note... 900 bucks catback system. All you need then is a hi-flow cat and your front/dump and your done. I reckon you could get away with it for about 1200 if you fit it yourself.

Good luck,

Ev.

ive got a blitz nur spec 3" catback and cat from batmbl im planning to get rid of for a 3.5" system

anyone interested shoot us a PM.

but ill try get you some youtube vids asap.

honestly i still rekon the Blitz sounds the best. but unfortunately for me its a 3" system and not a 3.5 or a 4 =[

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...