EBC vs Adjustable Actuator

[gtstii]

What would be the benefits of going an EBC over an actuator with an adjustable arm?

Is it only the fact that an ebc will bring boost on faster?

Do you still get spikes when using an adjustable actuator?

I prefer the actuator cos it isn't really noticeable and cheaper?

any opinions?

thanks

ps. who sells adjustable actuators for gtst's?

(i imagine it wouldn't be too hard to just modify the arm on the existing one by threading it etc?)

[gtstii]

Does anyone see any problems with doing the following?

- Cutting actuator rod on gtst

- Threading the ends at the cut

- Placing a coupler between this section

- Using this as an adjustable actuator

Is this possible with the stock actuator?

ie. does the spring, diaphragm have enough travel to allow the arm to be adjusted so it won’t open until you hit 12psi? (it can’t be too far off if you get 10psi up top of rev range with standard set up)????

thanks

[b2barker]

It shouldn't spike much because of the it starts to open before you get to the boost you want.