Jump to content
SAU Community

Recommended Posts

Hey all.

Any southeners after some spare change one weekend?

I ordered an HKS Heavy Duty adjustable turbocharger actuator of Nengun last August and received it in December. 5 months later I still cant see when it would get fitted.

Are there any handy-andy's down south who wouldnt mind getting their hands dirty for a) $70 cash?, b) or 2x bottle of spirits such as Jim Beam, c) or a premium case of beer, to install the hks turbo actuator for me? Just too hard on my knees to bend over the bonnet and work on the car with no kneecaps..... last time I installed splitfires (1 month ago) I was ruined for a week lol.

Ive got some tools, fairly basic, and got room in the garage out of wind/rain etc. Live in morphett vale and am a very friendly host, the water billy can be fired up & passed around no worries :D

Just after one southener who wouldnt mind sparing an hour of his/her time, for shop rates (boostwerks is around $70 for an hour) and I cant see why the actuator would be more than an hour to install and set to 1 bar?

Link to comment
https://www.sau.com.au/forums/topic/220544-turbo-actuator/
Share on other sites

Brenden, when you looking to do this? I should be free June 14/15 if you want a hand then. If beforehand, someone else should be able to help you.

I have the R33 workshop manual still too, so should make working things out rather easy :D

Link to comment
https://www.sau.com.au/forums/topic/220544-turbo-actuator/#findComment-3889070
Share on other sites

Its a standard RB25 turbo, but highflowed front and rear housings by Sliding Performance, with oil/water journal bearing centre.

Using stock rb25 actuator atm.

How much did the highflowing cost ya tangles....and what are the benefits of getting that done!

BTW the bov is f**kn awesome mate no probs whatsoever

Link to comment
https://www.sau.com.au/forums/topic/220544-turbo-actuator/#findComment-3889177
Share on other sites

It's either a 1 bar actuator which means no need to use a bleed valve to run the desired 1 bar, or For Example, Spike can be caused with a standard 4-5psi actuator because the bleed valve needs to work alot harder to bleed alot more air to reach the desired psi, where as say a 10psi actuator is already close enough to the 1 bar mark so therefore doesn't need as much bleeding hence less spike.

Link to comment
https://www.sau.com.au/forums/topic/220544-turbo-actuator/#findComment-3889200
Share on other sites

Done Ryan!!

sweeet ! cheers matey, if youve done it before should be all good.

its a 1bar (14.7) actuator, and Im tuned for 1bar as well with a dual stage ebc (albeit drops to 12 psi, hence this actuator needs to be installed).

sending you a PM, cheers for offering

Link to comment
https://www.sau.com.au/forums/topic/220544-turbo-actuator/#findComment-3889222
Share on other sites

hey Krishy!

yeah the highflows arnt done by Slide anymore, unfortunately.

I got a good deal, supplied 2x ruined turbos and some cash (under 700) for the highflowed turbo, steel wheels, 360deg bush bearing, oil and water cooled, rated 250rwkw at 1bar.

Other shops do similar highflows, journal bearing, for around 1300.

Glad to hear the BOV is good, sounds pretty cool hey! I miss it :down:

Rub's, yeah mate has an Apexi mechanical boost guage. Ryan says he's done heaps before, and if he doesnt mind a drive and a billy and a gift of a) b) or c) then its all looking good atm. sent a PM ryan. :bunny:

Link to comment
https://www.sau.com.au/forums/topic/220544-turbo-actuator/#findComment-3889239
Share on other sites

yeah the slide-highflows are pretty decent

mines just a stage "2" highflow, the stage "3" has the VG30 rear housing

my inlet and exhaust have been ported to the extreme !

ryan, Ive got some tools (you'd probably want to bring some of your trusties along tho), a real good jack, and some dodgy wheel ramps if needed. only thing is with no kneecaps I cant kneel or squat or stuff like that :bunny:

Link to comment
https://www.sau.com.au/forums/topic/220544-turbo-actuator/#findComment-3889484
Share on other sites

'sif I can trust you, lol

:bunny:

your pc will never be ready anyways

I gave you a dodgy list lol, the items you bought wont work together !!!

muauahahahahahahaha

<evil laugh>

why no Mr Bond, I expect you to dieeeee

Link to comment
https://www.sau.com.au/forums/topic/220544-turbo-actuator/#findComment-3889513
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...