MELV Posted August 10, 2003 Author Share Posted August 10, 2003 Went to subzero, that car u are talking about well, the motor alone is worth 40000$ and they really shocked me. telling me all the bad things about the GTR gearbox , clutch o well. i will have to find someone to take me for a drive in one. if it impress me ill consider Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-478047 Share on other sites More sharing options...
paydro Posted August 10, 2003 Share Posted August 10, 2003 well they had me going cause ive got them stating that the whole car was for sale for $40000 something on a dvd i bought not so long ago, yea take me for a drive in a gtr too i dont have the money to consider but it would be cool Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-478051 Share on other sites More sharing options...
rev210 Posted August 10, 2003 Share Posted August 10, 2003 driving one is the only way. Consider that with 11 second potential an R32 GTR with 2530 turbos can race around a track and provide a great responsive daily driver. If you drive a GTR with these turbo's you will never go back. Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-478054 Share on other sites More sharing options...
PurpleR32 Posted August 10, 2003 Share Posted August 10, 2003 Originally posted by MELV Went to subzero, that car u are talking about well, the motor alone is worth 40000$ and they really shocked me. telling me all the bad things about the GTR gearbox , clutch o well. i will have to find someone to take me for a drive in one. if it impress me ill consider First of all, that car makes serious power, so what did you expect it to cost $5? What bad things did they say about a GTR? Second the stock GTR gearbox is a sensational piece of automotive equipment. You try to put 3 times the manufactures power through a WRX gear box and see how long it lasts. Same goes for a clutch, but you can source strong ones at sensational prices. BUT what times do you want to run? Speed costs money, how fast do you want to go? Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-478438 Share on other sites More sharing options...
nissaner Posted August 10, 2003 Share Posted August 10, 2003 Originally posted by RedR32 You try to put 3 times the manufactures power through a WRX gear box and see how long it lasts. puhahahaha... i should know about these.. i work at a subaru workshop... Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-478601 Share on other sites More sharing options...
MELV Posted August 10, 2003 Author Share Posted August 10, 2003 well its looks like its going to cost a fair wack of money to get a 33 into a 10. What about if i do some simple mods like, cooler , up the boost , exhaust , twin air filters and cams, button clutch. will the be a good solid combo ? Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-478798 Share on other sites More sharing options...
GeneralSpeed Posted August 11, 2003 Share Posted August 11, 2003 If you are going to get a GTR that does 10's, get an R32. Japan has plenty for import if you have the cash. For example here's one that would easily run 10's (and probably 9's if setup right) and it's only $35k~ http://www.prestigemotorsport.com.au/au/st...sp?StockID=1100 This one was already sold, but theres that many high hp R32 GTR's floating around the Japanese auctions you would be stupid not to consider them Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-478909 Share on other sites More sharing options...
GeneralSpeed Posted August 11, 2003 Share Posted August 11, 2003 Oh and that price is very damn valuable I might add. Trust 6 speed gearbox's are like $AU10k+ alone, you'll pay about the same for the T-88 turbo kit, and that doesn't include the bodykit, internal engine mods (it would have to have a built bottom end to reach 800hp/ps), wheels, roll cage, guages, suspension, carbon fibre bonnet and so on. That sort of value is indicitive of the general value in buying from japan. If I had ~$35k that car would have been mine.... Oh and if you have LOTS of money, try this one - http://www.prestigemotorsport.com.au/au/st...sp?StockID=1264 Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-478913 Share on other sites More sharing options...
Maxx Posted August 11, 2003 Share Posted August 11, 2003 building a 11 sec gtr is not that expensive, but 10 sec is. the maintance of a 10 sec car is scary. btw,11 sec is more than enough and will be a big different again with yr commie. low to mid 11 sec - 2 x GT2530 tubro, intercooler, cams + cams gear, gasket, full exhaust system, injectors, fuel pump, Power Fc, clutch (somewhere around $20000-25000 ) not that much as i guess u have to spend similar or more to bring yr LS1 to 12.2 sec Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-478939 Share on other sites More sharing options...
Maxx Posted August 11, 2003 Share Posted August 11, 2003 Originally posted by GeneralSpeed Oh and that price is very damn valuable I might add. Trust 6 speed gearbox's are like $AU10k+ alone, you'll pay about the same for the T-88 turbo kit, and that doesn't include the bodykit, internal engine mods (it would have to have a built bottom end to reach 800hp/ps), wheels, roll cage, guages, suspension, carbon fibre bonnet and so on. That sort of value is indicitive of the general value in buying from japan. If I had ~$35k that car would have been mine.... Oh and if you have LOTS of money, try this one - http://www.prestigemotorsport.com.au/au/st...sp?StockID=1264 The following vehicle has just come into stock with a supplier in Japan for 3,520,000 yen FOB. The cost in Australia is estimated to be $60,300. We have included the cost of shipping, import duties, GST, and our service fee in this estimate. Not included is the cost of compliance (about $4,000), tyres, Govt. stamp duty and registration (normal licensing costs for any vehicle). The additional cost required to remove all modified parts for compliance is not included. need to remove EVERTHING in the car and put them in again after compliance! the labour i guess would be another 10000 or so:shake: Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-478945 Share on other sites More sharing options...
PurpleR32 Posted August 11, 2003 Share Posted August 11, 2003 Finally some people that know what their talking about. Recepie for 11sec. 2x Air Filters 2x HKS 2530 Turbos 6x 550+cc injectors Apexi Power Fc z32 AFM Cam Gears Twin Plate Clutch (dont stuff around with a single button) Intercooler FULL Exhaust (Dumps-Tip) A new bosch motorsport in tank fuel pump Good tyres Up graded Brake Pads (Going faster means you have to stop faster too) Competent Tuner with accurate dyno Maybe Suspension if there is money left over What you Dont need: Different cams. Not worth getting step 1 size because money could be better spent else where and Step 2+ need to modify the head, again spend money else where Head Gasket, providing you follow the Competent tuner advice and keep boost levels about 1.5bar which is right at about the efficiency of the HKS 2530's Bigger turbos Forged Engine Internals Forged Gear Set Providing you dont mind going second hand parts you could probably get away with spending $10-13k including tuning and labour. Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-480002 Share on other sites More sharing options...
GeneralSpeed Posted August 12, 2003 Share Posted August 12, 2003 Originally posted by Maxx The following vehicle has just come into stock with a supplier in Japan for 3,520,000 yen FOB. The cost in Australia is estimated to be $60,300. We have included the cost of shipping, import duties, GST, and our service fee in this estimate. Not included is the cost of compliance (about $4,000), tyres, Govt. stamp duty and registration (normal licensing costs for any vehicle). The additional cost required to remove all modified parts for compliance is not included. need to remove EVERTHING in the car and put them in again after compliance! the labour i guess would be another 10000 or so:shake: Hey if you've got $60k for a car you can probably call in another $10k for something like that, especially a 1000hp skyline! Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-481880 Share on other sites More sharing options...
rev210 Posted August 12, 2003 Share Posted August 12, 2003 There are a few R32 GTR's that have run high 11's on the standard turbo's and ECU. Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-482033 Share on other sites More sharing options...
Guest INASNT Posted August 13, 2003 Share Posted August 13, 2003 Originally posted by rev210 400hp at the wheels is what I've got now with the NOS kit. :bahaha: 300rwkw with stock everything??? pfftt I would like to see that Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-483412 Share on other sites More sharing options...
rev210 Posted August 13, 2003 Share Posted August 13, 2003 It's fargin scary let me tell ya. I finished a detuned setup today (timing backed off and the fuel on the rich side). The thing spins the wheels all through 2nd from 2500rpm till 100kmh, smokes the tyres all the way and gives more of the same in 3rd. I'm thinking of doing a smaller jetting for tyre ecconomics, 205's are not up to the task Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-484282 Share on other sites More sharing options...
benm Posted August 13, 2003 Share Posted August 13, 2003 God damnit someone lend this guy some 255's just for 1 nite please oh please !!!! Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-484345 Share on other sites More sharing options...
Guest INASNT Posted August 16, 2003 Share Posted August 16, 2003 Originally posted by rev210 It's fargin scary let me tell ya. I finished a detuned setup today (timing backed off and the fuel on the rich side). The thing spins the wheels all through 2nd from 2500rpm till 100kmh, smokes the tyres all the way and gives more of the same in 3rd. I'm thinking of doing a smaller jetting for tyre ecconomics, 205's are not up to the task i thought u were running a 50hp shot? Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-487979 Share on other sites More sharing options...
rev210 Posted August 16, 2003 Share Posted August 16, 2003 na it's a bit more than that now. Like about 100 extra at the tyres Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-488101 Share on other sites More sharing options...
vspecv Posted August 23, 2003 Share Posted August 23, 2003 Originally posted by MELV well its looks like its going to cost a fair wack of money to get a 33 into a 10. What about if i do some simple mods like, cooler , up the boost , exhaust , twin air filters and cams, button clutch. will the be a good solid combo ? this combination and the right tuner should do 11s,but forget the cams,cam gears are all u need,with a competant tuner u should get 240-250kw which is good enough for high 11s.u wont even need the cooler. Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-498353 Share on other sites More sharing options...
Nizmo_81 Posted August 23, 2003 Share Posted August 23, 2003 Melv, its andrew here man when are you going to come up and see me at work? u know i can hook you up with a gtr !!!! and parts wise mates rates cya soon bro! BTW we got our dyno this week so next sat we are having a dyno day so you will have to come up and run the commie! also i just got 182kw out of my r33 !!! talk to you soon Link to comment https://www.sau.com.au/forums/topic/22066-help-getting-a-gtr-r33-into-10s/page/2/#findComment-498364 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now