Jump to content
SAU Community

Removing Whole Air Filter

Curmi

By Curmi,
in General Automotive Discussion

 Share

Recommended Posts

Curmi Grand Master

Curmi

Posted
Posted

i wanted to take my air filter, afm the whole pipe off but then i saw there are a couple of pipes attached to it...so can i just block these pipes? or do i let it be.

also anyone else done this? was it easy?

just thought i would ask you guys this befor i chop pipes and hoses lol

thanks

Link to comment
https://www.sau.com.au/forums/topic/220816-removing-whole-air-filter/
Share on other sites
ignuz Mentor

ignuz

Posted
Posted
i wanted to take my air filter, afm the whole pipe off but then i saw there are a couple of pipes attached to it...so can i just block these pipes? or do i let it be.

also anyone else done this? was it easy?

just thought i would ask you guys this befor i chop pipes and hoses lol

thanks

Why?

dmr Mentor

dmr

Posted
Posted (edited)
so i can get a dossing sound..

trust me bud, women dont like it. i know you're doing it for the ladiez and think they get nipple fats when they hear it, but really they think you have a small dingaling.

but anyways back to the topic, the 2 pipes connected to the intake snorkel is your blow off valve return line and a crankcase breather (or blowby).

i wouldnt go blocking off the breather but if you're not going to run a bov then you can block off the bov return line.

OR.

save yourself the headaches and potential turbo/engine damage and get a stainless steel intake pipe. you'll have mad flUttErZzZzz.

Edited by dmr
Curmi Grand Master

Curmi

Posted
  • Author
Posted
trust me bud, women dont like it. i know you're doing it for the ladiez and think they get nipple fats when they hear it, but really they think you have a small dingaling.

but anyways back to the topic, the 2 pipes connected to the intake snorkel is your blow off valve return line and a crankcase breather (or blowby).

i wouldnt go blocking off the breather but if you're not going to run a bov then you can block off the bov return line.

OR.

save yourself the headaches and potential turbo/engine damage and get a stainless steel intake pipe. you'll have mad flUttErZzZzz.

and no i am not doing it for the ladies i have a misses alredylol i just want the big dose sound because i simply just like it

dmr Mentor

dmr

Posted
Posted (edited)
yea i was going to do that why not do it?

1. it's not designed to run in the cooler piping

2. wierd readings

2. the reading pin inside the air flow meter is a delicate object which you wouldn't want to damage at high boost levels.

Edited by dmr
Curmi Grand Master

Curmi

Posted
  • Author
Posted
1. it's not designed to run in the cooler piping

2. wierd readings

2. the reading pin inside the air flow meter is a delicate object which you wouldn't want to damage at high boost levels.

i am only gonna run 13-14 psi only..hmm might not do this now arhhh

QUICKY Community Regular

QUICKY

Posted
Posted

mate this site is full of critics. if u want dose, than all the best with it. Whether they think its a wank factor or not, when a car doses everyones heads turn. and so what if they have no performance benefit, neither do bodykits or bigger wheels, yet most cars on this forum have one or the other, if not both :)

DECIM8 Grand Master

DECIM8

Posted
Posted (edited)

Quicky has it on the head, damage wise shouldnt cause a problem on low boost but ive seen the vl guys running 20psi on there rb30s with no issues.. It does sound "off tap"

Omar I looked everywhere for that Pink Unicorn... wtf is it?!

Edited by DECIM8
Curmi Grand Master

Curmi

Posted
  • Author
Posted
Technical info just in, sick dose sound does not come just from metal pipe.. tested and offically makes induction sound louder but not dose.. tightening the bov will tho.

how do i tighten my stock bov? can you do that to a stock one?

Curmi Grand Master

Curmi

Posted
  • Author
Posted
mate this site is full of critics. if u want dose, than all the best with it. Whether they think its a wank factor or not, when a car doses everyones heads turn. and so what if they have no performance benefit, neither do bodykits or bigger wheels, yet most cars on this forum have one or the other, if not both :)

yer i will get dose lol ill look a bit more into it..cheers

dmr Mentor

dmr

Posted
Posted (edited)
Technical info just in, sick dose sound does not come just from metal pipe.. tested and offically makes induction sound louder but not dose.. tightening the bov will tho.

you can tighten your stock bov by putting it under a vice grip and "crushing" the top of the bov a couple of millimeter. i would only advise this if you're doing it for bov leaking purposes. using a blanking plate is the same as tightening a bov enough for no air to pass through.

stainless intake pipe will increase the sound of your "dose" because of the resonating sound traveling through. the standard rubber snorkel deadens it.

have a read of THIS. he's apparently the master of "dosing". your new best friend.

hope that helps!

Edited by dmr
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Yet another RB Neo misfiring thread after reading all the others.

      By Dose Pipe Sutututu · Posted

      Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • GTSBoy
      Yet another RB Neo misfiring thread after reading all the others.

      By GTSBoy · Posted

      Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • uchoa
      Yet another RB Neo misfiring thread after reading all the others.

      By uchoa · Posted

      Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
    • fatz
      Beers and skylines Fatz style

      By fatz · Posted

      House of Fatz dry dock needs a clean sadly one of the long time stables is leaving this weekend   see ya mr purple
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      Hence why I've only modified my car into a pure daily. Everything has to remain reliable & roadworthy, while providing value and grin factor. It also must not be handcrafted to the extent that the car will be immovable if something breaks because you cannot get or make a replacement to at least limp around with.
×
×
  • Create New...