Jump to content
SAU Community

Recommended Posts

Make:R32

Model: GTR

Milage:70-80 000 ks

Transmission: manual

Colour: gunmetal grey

Location:Shire

Complied? yes

RWC supplied?

Currently registered? No but have engineers papers & blue slip.

Price: 12k Firm

Contact: 0409 744 904

Comments / Modifications: Standard except for a GFB boost valve, car is in very good condition urgent sale due to other responsibilities, car is running approx 15psi & is making 200kw @ All four wheels. ALSO REASON WHY CAR IS CHEAPER THEN USUAL GTR'S IS BECAUSE THE LEFT BACK WHEEL IS BENT A LITTLE BIT AS YOU CAN SEE IN THE PICTURES HAVE HAD IT QUOTED TO BE FIXED UNDER $400. :D

Images:IMG_3137.jpg

IMG_3136.jpg

IMG_3139.jpg

IMG_3135.jpg

IMG_3138.jpg

is that left rear tyre wearing badly or is that just dirt or something?

*edit* don't worry i jsut realised that it is in fact worn to the belts..carry on

Edited by Black Widow

so how often do you run it in 2 wheel drive mode??

and how many gutters you hit in it??

why so cheap, there must be other reasons?? u just dont sell a low km GTR for that cheap becuase one rim is buckled.

im not trying to waste ur time. so dont flame me, just asking some questions

if i were you i would buy a set of $1000 rims and sell the car for $15,000+

but GL with sale anyway

I know if I had the money I wouldnt be whinging, I would be on his doorstep giving the once over and driving away a happier man =)

Good luck to whoever buys it....

so how often do you run it in 2 wheel drive mode??

and how many gutters you hit in it??

why so cheap, there must be other reasons?? u just dont sell a low km GTR for that cheap becuase one rim is buckled.

im not trying to waste ur time. so dont flame me, just asking some questions

if i were you i would buy a set of $1000 rims and sell the car for $15,000+

but GL with sale anyway

mate rims r fine... :P

its something to do with the control arm...

reason for being so cheap is one no rego & 2. I want it out of my drive way asap as i have a few other cars and a mortgage to pay and theres no necessity for having this just sitting around...

im driving it, hahaha

$$$ 9500

and makes 232 awkw on 11.37 psi.....

changed plugs and intake pipes.

lol stick that up ur ass's, sometimes time is money for some people

and if they cant be f*ked with things they will let them go cheeap, there is no scientific explanation

they just want it gone...

good buy and was it just rear subframe bent and control arms????

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...