Jump to content
SAU Community

Query: V35 Top Speed

rip
 Share

Recommended Posts

MaXiMuS007 Mentor

MaXiMuS007

Posted
Posted (edited)

Japanese cars are electronically limited to 180km/h - this is why they all have 180km/h speedos.

You can get speed cut defenders which will remove the limit.

Anyone know how fast it would go without the limiter? My guess is 240-250ish (it does have a low Cd)

Edited by MaXiMuS007
prdreilly Contributor

prdreilly

Posted
Posted
my mate the other day in his 350z hit 230km and it wanted to keep going so perhaps around 250 maybe more...

has anyone tried to take their v35 over 180?? does it speed limit and loose power?? what happens

I found that it went about 8 Km/h off the end of the dail, before it hit "the wall". Nothing dramatic, still smooth, just stops accellerating.

NISMO Grand Master

NISMO

Posted
Posted

On the track, the car gets to 180 quite easily and I would guess it's got a lot more in it. From memory it was around the 4500-5000rpm range in 5th gear. I've done a cruising lap where it was in 6th sitting at just over 3000rpm doing 160-170km/h

spikey Community Regular

spikey

Posted
Posted
my mate the other day in his 350z hit 230km and it wanted to keep going so perhaps around 250 maybe more...

has anyone tried to take their v35 over 180?? does it speed limit and loose power?? what happens

I've done twice top speed on my v35, it's speed limit. u will feel the power banned even you hit the pedal.

scathing Grand Master

scathing

Posted
Posted

Non-JDM 350Zs have a 250km/hr speed cut. I've hit 243 (speedo indicated) before, and that was a struggle to reach even though I was near peak torque.

Theoretical top speed is around 300km/hr with a 6MT, if you crunch the numbers and calculate with a 6850RPM fuel cut. There's no way a NA FM platform car is going to reach it though.

rb26stagea Grand Master

rb26stagea

Posted
Posted

look at the gear ratio for 6th gear (in a manual), and cross reference it with the known rev cut in the car: it will give you the theoretical top speed, ignoring friction, wind resistance, etc...

MaXiMuS007 Mentor

MaXiMuS007

Posted
Posted

Gotcha...

Engine Speed to Speed of Car:

v = 2πrω/Ggk

where:

v=velocity (m/s)

r= radius of tire (m)

ω= engine speed in rotations/sec

G= final drive ratio

gk = k-th gear ratio

Assuming 6MT with 18" wheels & stock tyres, theoretical top speed = 300.1264km/h!

MaXiMuS007 Mentor

MaXiMuS007

Posted
Posted

I've spent far too much time this afternoon trying to develop a spreadsheet to do the top speed calcs. The calcs are based on a 6MT on 18s and the spoiler (Cd=0.28).

I can't find any firm data on the frontal area of the vehicle, so I have assumed Ap=2.5m^2.

The theoretical maximum speed is ~308km/h based on the peak power figure alone. Obviously this will be limited by gearing and air resistance.

The maximum real speed I calculate is 281.02km/h... this corresponds to 6150rpm in 6th gear. Air density is assumed as 1.204 @ 20degC.

FYI, if the frontal area is actually 2.8m^2, maximum speed reduces to 269.65km/h.

Lower temperatures (higher air density) will also affect these figures.

scathing Grand Master

scathing

Posted
Posted

I was considering putting a 3.9 final drive in my diff, so I had a look at how it would affect my in-gear speeds.

This table provides the data, although it does need to be updated for the HR engines' cutout and the possibility that some FI guys might want to run the 3.2 final drive out of the auto diff to make more use of their wide spread of torque. I know, if I was going TT, I would.

matt smith Rookie

matt smith

Posted
Posted

I have a gt-8 and have done a couple of runs recently to test exactly that for my own curiosity.It certainly wasn't limited at 180 and still had heaps left at 210,but ran out of road.i will say it gets there in no time as well.

MaXiMuS007 Mentor

MaXiMuS007

Posted
Posted

If anyone is interested, I've attached my top speed calculation spreadsheet. Defaults numbers belong to a 2003 6MT 350GT. Spent WAAAAY too much time on it.

Feel free to play around with it as you wish. It should work for any vehicle (with a maximum engine RPM of 8600)

Speed_Calcs.zip

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Blue slip

      By MBS206 · Posted

      Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • soviet_merlin
      Ethanol Content Sensor - Always at 11%?

      By soviet_merlin · Posted

      Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
    • PranK
      Blue slip

      By PranK · Posted

×
×
  • Create New...