Jump to content
SAU Community

Recommended Posts

just changed my dashboard cluster globes with leds tonight and thought I'd clean up that clear plastic cover that covers all the gauges .. Turns out the stuff can't be cleaed. Looks like someone had sprayed some sort of clearning detergen over the clear cover and didn't wipe it off and it just won't come off ... like the plastic is ruined (although it feels smooth on touch)

Anyway was wondering if there are any skyline wreckers in sydney ? This is for an R34 GTT... or if anyone has any suggestions on what to try and clean this crap off with, I'm all ears. I've tried standard detergent, alcohol etc and the stains won't budge

Link to comment
https://www.sau.com.au/forums/topic/221545-skyline-wreckers-in-sydney/
Share on other sites

give it a cut and buff we used to do it all the time

cause when we had dashes out at panel shops the idiot beaters used to spill all kinds of shit on em (brake, fluid thinners, etc, etc)

quick wet sand with some 1500 and then run the buff over it and it should be fine

Ok I've tried 5 different cleaners and none seem to be able to get rid of this crap (even tried Maguires ScratchX .. which btw is a useless product - doesn't do crap on paint scratches either)

Abo Bob, is it unblemished and fits a GTT ? If so, do you want to sell it and if so how much? :thumbsup:

Ok I've tried 5 different cleaners and none seem to be able to get rid of this crap (even tried Maguires ScratchX .. which btw is a useless product - doesn't do crap on paint scratches either)

Abo Bob, is it unblemished and fits a GTT ? If so, do you want to sell it and if so how much? :thumbsup:

Forget the cleaner products they won't work.

Follow Dahtone Racing's instructions and you will find your cluster will be fine.

Wet sand with 1500 as he said.

Then polish it.

Don't bother with cleaners.

Ok I've tried 5 different cleaners and none seem to be able to get rid of this crap (even tried Maguires ScratchX .. which btw is a useless product - doesn't do crap on paint scratches either)

Abo Bob, is it unblemished and fits a GTT ? If so, do you want to sell it and if so how much? :P

Maguires ScratchX worked fine on my headlights to get rid of the yellow haze, though I used it to buff out scratches left behind by 2000 grit abrasive paper.

Wet sand with 1500 as he said and hand polish with Maguires's plastic polish (can't remember the name)..

ScratchX mentioned earlier will work as a plastic polish, but I believe Maguires PlasticX is what your thinking about :)

can someone just quickly explain to me what 'wet sanding' means ... just what it says ie. poor water over the plastic whilst sanding it ? What does this achieve?

You keep the item you are sanding and the paper wet. It makes the sand paper less abrasive and therefore leaves finer scratches. The idea of sanding is to start with a more abrasive paper and finishing off with a polish. In English you sand the big lumps off first and work your way down to the small ones :D

Try Brasso buy it from supermarkets. Have used it for years to clean perspex, polishes alloy wheels perfectly. Don't waste your money with the fancy named brands- try it you won't be dissapointed-its cheap.

You may need to use wet and dry if you panel is badly marked-I would use 2000 then brasso.

headlight repair kit to fix what ? the yellow headlight haze someone mentioned or the clear cluster plastic ??

To do either, esentially its doing the same thing. Making plastic go from that dirty opaque look to a clean clear look by removing layers of plastic. I have to tell you though to patient with it. Results aren't instant and the longer you take polishing them up the better they will look. :)

Try Brasso buy it from supermarkets. Have used it for years to clean perspex, polishes alloy wheels perfectly. Don't waste your money with the fancy named brands- try it you won't be dissapointed-its cheap.

You may need to use wet and dry if you panel is badly marked-I would use 2000 then brasso.

Damn! Why didn't I think of Brasso :) I'll have to keep that in mind for when my headlights get eventually yellowed again and I run out of ScratchX :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...