Jump to content
SAU Community

Recommended Posts

well dropped off my car at trojasn today and pauls first thoughts is that the turbo needs replacing, so what are optiosn in this situation so im not talking to them blind. os if i could get ideas, or websites to lolok at the would be great, or if someones been in the same situation

refurbish (i guess this depends on condition or current turbo)

buy a 2nd hander

buy a garret replacement

or a new one with all new fittings

Link to comment
https://www.sau.com.au/forums/topic/221717-tubo-on-its-way-out/
Share on other sites

You could rebuild it, though that is expensive and you are still stuck with a stock turbo.

You could replace it with a 2nd hand stock turbo ~$300, no guarantee that the turbo works but its cheap.

You could replace it with a Garrett unit some are bolt on.

You could replace it with a HKS GT-RS kit. Expensive but it comes with everything and is a fantastic bolt on turbo if you only want to make ~250-260kw (provided you upgrade the support systems for it).

yeah jon straight away showed me the hks turbo, look im happy with the 194rwk, but the temptation of 240 is pretty big, plus the hks comes with braided lines and new turbo bits and pieces, what sort of supporting mods would you need for 240/260????

Fuel pump, larger injectors ( nismo 555cc / stock S15 480cc ), after market ECU. The hks kit comes with all the new oil and water lines, gaskets and such. Everything else should be fine (assuming you have FMIC, ~3" turbo back exhaust, boost controller)

Edit. Forgot about the clutch. The stock one wont like that much power :happy:

Edited by TiTAN

john probably would have told you bout the KKR turbos. john put the KKR430 on mine and im very happy with it, it feels very responsive and cheap i made 252kw with it. a friend of mine had john put on the KKR 480 and made 300 for not much more but with standard engine i stuck with the 430

i have aftermarket clutch, ecu and the other parts not sure of pump and injectors. whats the difference with kkr and gtrs hks turbos, and ben if i cold get a look at one point that would be great,

mang if you dont mind how much the 430 set u back installed, im only after 200rwkw but wouldnt mind going up to 240rwkw, lol, i like even numbers

Hks made by Garrett to Hks specs, so made in USA, ball bearing turbo, say $3000 for a kit.

KKR made by KKR in Korea, bush turbo, say $800 plus water/oil lines $250.

Give or take a few $$.

If your poor, and don't intend keeping the car - or inversely the turbo - forever, go the KKR.

If you can afford it go the HKS, its like comparing an excel to a corolla, you get what you pay for.

HPI had a write up on the KKR a while ago, issue 84.

hmmm, more possibilities this is good, why did you take it off, at what ks???

alex

I have a stock S1 turbo you can take for $200. It doesnt have shaft play (or very little that goes with oil pressure) and only did 15psi a few times, but ran near stock most of its life.

Plus you learnt u want a new clutch now (or at least adjustment on yours) hehe

If a S1 turbo works on your car, datto's sounds like the best option. I was also thinking Alex, if you were lookin at mine for a rebuild - might as well rebuild your own hehe

YGPM = you got private message!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...